New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Looking for good shop with CNC capabilites near me

Posts

Looking for good shop with CNC capabilites near me

#1

Looking for good shop with CNC capabilites near me

Scott Burr in Ben Lomond CA

Hi All,

Anybody know of a good shop with a CNC set-up in or around the San Jose, CA area?

Or for that matter a good search "quote" to find one?

Thanks!

Scott

Re: Looking for good shop with CNC capabilites near me

#2

David Barnett

General advice: depends on whether you want... *LINK*

David Barnett

... manufacturing and production services or prototyping, Scott.

Google prototyping machine shop "san jose" ca and you'll get some interesting possibilities. Most prototyping shops have some form of CNC machine center or access to one. While prototypers are amenable to one-offs and short production runs, this says nothing about cost. Some prototypers can be expensive, but not always.

For straight production-manufacturing, you might need to look elsewhere, but prototyping shops may also offer a seamless transition from prototyping, to developing manufacturing procedures, to final production. Beyond this, some even offer promotion and distribution tracks, but you need to be an astute businessperson to avoid pitfalls that can lurk in total solutions approaches.

Also, most manufacturing CNC facilities specialize, as do prototypers, for that matter, so ask what their specialties are and shop around. I'd just pick one from the listings, go and see what happens. If they don't do what you need, they'll likely know who will.


TechShop -- a hand's-on approach

Re: Looking for good shop with CNC capabilites near me

#3

David Barnett

I edited and added to the above -- please, reread

David Barnett

Re: Looking for good shop with CNC capabilites near me

#4

Chris Scholz

Re: Looking for good shop with CNC capabilites nea *LINK*

Chris Scholz

JWP Manufacturing

3500 De La Cruz Blvd.

Santa Clara, CA 95054

Say hi to Piotr from me.

Chris


JWP Manufacturing

Re: Looking for good shop with CNC capabilites near me

#5

Sorry all, I should have been clearer...

Scott Burr in Ben Lomond CA

I need a cabinet shop that can CNC some plywood speaker cabinets.

Thanks!

Re: Looking for good shop with CNC capabilites near me

#6

David Barnett

Having one of those...

David Barnett

... "What p�t�? And where's my stool sample?" moments, Scott?

Re: Looking for good shop with CNC capabilites near me

#7

Better than...

Bob Hackett

A close one eye and fart moment. :D

Re: Looking for good shop with CNC capabilites near me

#8

Hey David...

Scott Burr in Ben Lomond CA

I like a good pate. But now that you mentioned it...

Bridiget?!? Bring back Mr. Hankie, that's not a cat toy!

Boy I'm going to have fun trying to 'splain this one...

Re: Looking for good shop with CNC capabilites near me

#9

Re: Sorry all, I should have been clearer...

TomD

That might be a task for CNCzone. One-off CNC isn't all that economical, and there are a lot of guys who have these set-ups and may either like doing a solid, or not yet have figured out how to price their work. But by all means see if the local pros will quote you a price that leaves you with a smile. I have yet to ever get a decent quote where I didn't just find another way.

For the benefit of anyone out there who doesn't know this stuff. CNC is not a license to print parts. First you need a proper cad drawing, which means not only a drawing, but one that a machine could follow, no gaps, though some software will smooth that out. Design with snaps if you can. Then the guy with the machine ususally, has to use other software to design toolpaths with offsets and all the cuts built in so that the drawing can be cut out by the actual machine making the cuts. And then parts need to be held if that is an issue at all. Extents need to be identified, and so on. And then the machine has to run, it can take quite a while to run. The more expensive the machine, one hopes the faster, so as with anything else you either pay for time, or capability. CNC guys often complain about how people figure that now that they have a CNC it will be incrementally free for them to cut everyone's parts.

Not to mention capital costs.

I am building a small milling cnc from scratch, but I am just getting up to speed.