New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Replacement irons for 71/71.5 router

Posts

Replacement irons for 71/71.5 router

#1

Replacement irons for 71/71.5 router

Dave Mount

Speaking of new irons for old planes. . .I went to the Stanley parts site the other day with plans to finally order replacement irons for a couple Stanley routers. . .only to find I'd waited too long and they no longer sell them. I called to be sure and they are gone for good. I don't see them on St. James Bay's site and I assume that the Lie-Nielsen and Veritas irons won't work in the Stanley versions. Any suggestions?

Thanks.

Dave

Re: Replacement irons for 71/71.5 router

#2

Re: Replacement irons for 71/71.5 router *LINK*

Bill Houghton, Sebastopol, CA

Lee Valley says its cutters work in Stanley planes; I haven't tried it (having purchased cutters back when Stanley offered them), but there's something about flipping the adjusting wheel over or some such for them to fit. Someone will probably be along in a minute who can describe the "fix."


They mentions Stanleys, a ways down in the text

Re: Replacement irons for 71/71.5 router

#3

Re: Excellent, thanks!!

Dave Mount

Guess I didn't read carefully enough. . .

Re: Replacement irons for 71/71.5 router

#4

Re: Replacement irons for 71/71.5 router

Derek Cohen (in Perth, Australia)

In my review of the Veritas Router Plane there are photos comparing the blades (Veritas at the top, Stanley below) ...


Fitting the Veritas blade to the Stanley involved reversing the Stanley's depth control adjuster as the Veritas is 3/4" longer than the Stanley ...


Review reference: http://www.inthewoodshop.com/ToolReviews/The%20Veritas%20Router%20Plane.html

Regards from Perth

Derek