New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Grandpa's anvil story with pics (Long)

Posts

Grandpa's anvil story with pics (Long)

#1

Moses Yoder

Grandpa's anvil story with pics (Long)

Moses Yoder

About 10 years ago we decided to take a week long family vacation in Pennsylvania. On the way back home I decided to visit my grandfather�s place just to see it again. We spent the night in Wooster, Ohio where I was born on August 18th, 1967. The following morning I got up and said goodbye to my wife since she wanted to sleep in and headed south of Wooster to Apple Creek. I thought I could find the old place and turned at the road I thought I needed to and a house was there where I thought it should be but it looked completely different. I drove on past and ended up in Kidron where I asked around and was directed back to the house where I thought it should be. I pulled in and looked around some and the only thing I recognized was the old dilapidated barn. I knocked on the door and out comes my uncle Andy who had inherited the place. He explained that they had added onto the old house and it now looked totally different. We talked for awhile and I told him I was interested in seeing grandpa�s old shop and we eventually made our way out there. When we entered I was slightly shocked. There were cigarette butts all over the floor, most of the windows were broken, and the whole shop was in a general state of disrepair, grunge and dirt, and decay. We poked around for a while and I asked him if he was interested in selling any of grandpa�s tools and he replied that he thought those were worth quite a bit of money and he wasn�t selling any at this point. I noticed a nice anvil setting in one corner and told him if he ever wanted to sell any of it to let me know. We sat on a deck they had built and drank a cup of coffee then I was on my way. I thought about this visit occasionally but figured I would never see any of my grandfather�s tools again. About 10 years went by.

Summer 2009 about the end of June I went down to see my parents, about a � hour drive for me. I was pleasantly surprised to see my uncle Andy there. We sat and visited for some time and then he went into the bedroom. He came back out with something wrapped in newspaper and handed it to me, telling me he wanted me to have that. It was an old gouge my grandfather had used. I asked him why he was giving it to me, and he replied that they were having to sell the place and get rid of most of the stuff and move into town to an apartment. I didn�t ask, but he had gotten emphysema and spent some time in the hospital and I assumed they had to sell due to his health care costs. I asked if the anvil was still there and he replied that it was. I wondered how much he would have to have for it. He replied that when he saw those sell at auctions they go for around $100 to $150. I responded that I would gladly give him $150 for it if he would give me some time to get the money.


We live comfortably, but $150 for an unnecessary item is a lot of money to us. A lot of times we spend $150 for groceries but you can�t eat an anvil. I was kind of tossing my mind around wondering how I was going to get that money and decided to sell one of my planes. The trade was well worth it to me. I tried to sell a very nice plane locally at a tool meet and couldn�t find anyone with enough spare cash so I posted it on the WoodCentral classifieds. It sold within a day or so and after waiting to make sure the check cleared I made arrangements with my uncle to pick up the anvil.


I think it was the last Thursday in August 2009 I had a day off of work and headed for Ohio. I arrived at my grandfather�s old farm around 1:00 pm or so and woke my uncle from his nap and we sat on the deck and talked for a bit. After a while he asked if I was ready to load the anvil and we went out to the barn. The anvil was setting on an old stump with some nails pounded in and bent around to hold it in place. I asked my uncle what he was doing with the stump and he told me I could have it. He also gave me 3 tools that go into the hardy hole, one to cut metal and two different ones with a round groove in them that I assume are used to make metal round. He gave me an old hammer but it�s not really a blacksmith hammer to my knowledge but it�s hanging in the tool rack. My uncle Andy built the tool rack that is fastened at the top of the stump.


For some time I have been wanting to have a brass plaque made to let future generations know whose anvil it was. I tend to procrastinate about such things but actually got it done finally. The company I work for also owns the Blue Gate restaurant in Shipshewana, IN, which is kind of touristy, and they have a laser engraver in the basement. I drew the plaque on Autocad LT 2011 and sent the file to our engraver. I watched the engraver work as it made the plaque. It cost me $13.50 minus a 20% employee discount so final cost was a little over $11. Drilling holes into the stump to attach the plaque I found it is very hard wood. I can lift it by myself, it is not extremely heavy, but it is very hard to drill into. Somoen once told me wood geets harder as it ages and I didn't believe them; I may need to rethink that. These pictures are the best I can do with my camera and software; I miss Adobe Photoshop, my old copy will not load on my newer computer. Below you can see a picture of the plaque.





Below is a picture of the anvil and the stump it sets on.





And below, a closer view of the anvil. It is a Peter Wright anvil. The top is no longer flat (not sure if you can see this or not) but I have no intentions of trying to fix this in any way. My grandfather used it to repair buggies; the Amish church he went to did not allow rubber rims so the wheel rims were all steel and he would replace them when they wore out or broke. Blacksmithing interests me but I don�t think I will really get into it until maybe after I retire; I have enough stuff to do now. The anvil will get used occasional though; my dad wants to make some hooks and it will get used for misc. other stuff as well. Having an anvil around is handy, and this one will always bring back memories of the precious few days I spent with my grandfather.



Re: Grandpa's anvil story with pics (Long)

#2

David Barnett

Very nice, Moses. Very nice indeed!

David Barnett

That's a meaningful and becoming way to display one sweet little anvil. The plaque really does make it special. Even better, you're going to use it.

Re: Grandpa's anvil story with pics (Long)

#3

Re: Grandpa's anvil story with pics (Long)

GolfSteve in Calgary

Great story Moses.

Re: Grandpa's anvil story with pics (Long)

#4

That's great Moses

John in NM

So nice to see heritage being preserved when so many times we hear the "almost but lost it" kind of story.

Re: Grandpa's anvil story with pics (Long)

#5

Good story, Moses

Bill Houghton, Sebastopol, CA

Tools passed down in the family have a meaning that goes beyond their usefulness - a connection that goes way down into us. I'm glad you were able to retrieve it before it went away, and honor your grandfather as you did.

Re: Grandpa's anvil story with pics (Long)

#6

Very cool story, Moses! Thanks!

Stuart Hough

Re: Grandpa's anvil story with pics (Long)

#7

Re: Grandpa's anvil story with pics (Long)

anotherBob

Moses, Thanks for taking the time to tell your story. Perfect verse you selected (or was that one of your Grandpa's favorites?) for the plaque too. Kudos and enjoy it while it's in your keeping.

Re: Grandpa's anvil story with pics (Long)

#8

Re: Grandpa's anvil story with pics (Long)

wilbur

Nice! Thanks so much for sharing this.

Re: Grandpa's anvil story with pics (Long)

#9

Jesper, Denmark

Re: Grandpa's anvil story with pics (Long)

Jesper, Denmark

Great story, Moses.

Re: Grandpa's anvil story with pics (Long)

#10

Yours is a wonderful story, Moses

Bruce, a MN Galoot

You sure know how to preserve family history. Pass it along.

Re: Grandpa's anvil story with pics (Long)

#11

Re: Grandpa's anvil story with pics (Long)

Derek Cohen (in Perth, Australia)

Hi Moses

A wonderful story. How lucky you are to have tools of your grandfather. They are beyond value.

Regards from Perth

Derek

Re: Grandpa's anvil story with pics (Long)

#12

Re: Grandpa's anvil

Dave Mount

A nice tale -- I have a box of my grandfather's tools. I believe what I have is just those that were so abused or otherwise damaged that no one removed them for some other purpose, it's still fun to have them.

If you're not familiar, the weight markings are in hundred weights, converted to pounds as the first number x 112 + the second number x 28 + the third number. From the pics it looks like your anvil is marked 0,3,3.5, which would be 87.5 pounds, but I'm not sure I ever saw an anvil marked with a decimal point, so maybe that's not what I'm seeing. 0,3,35 doesn't make sense, as that would have been marked 1,0,7 instead.

A Peter Wright is a highly desirable vintage anvil. It is typical to see a fair amount of edge rounding, I'm not sure the edges were ever very crisp even when new. A little belly isn't a problem either. Experienced smiths actually like a little belly for straightening -- pounding something on a dead flat generally produces something not quite flat as the material tends to rebound a little. If you have a slight hollow to pound into, a tap with the material bridged over the hollow will bring it straight (if you're good enough to know how hard that tap needs to be).

The chisel-like hardy tool is for cutting as you surmise, from the shape it looks like a cold cut (cold cutters are more finely tapered than hot cuts). The other two are called bottom swages.

Regardless of whether you use it, it is nice to see its history preserved, but I hope you find the time and inclination to put it to work. Smithing is a lot of fun.

Dave

Re: Grandpa's anvil story with pics (Long)

#13

Moses - I sent you an e-mail

Bill Houghton, Sebastopol, CA