New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Bow front progress

Posts

Bow front progress

#1

Bow front progress

Bill Tindall


Finally got all the drawers done including a redo of #9 which somehow came out exactly 1" too deep on the first try. #9 has an English style "slip" to provide more bearing surface for this large drawer. I like to keep the sides 1/2" or less as I think it looks better and makes for a lighter drawer.

The drawers in rows 4&5 remain to be cock beaded. One can see the relief for the bead as an 1/8" gap around these drawers. Cock beading the bow front is especially time consuming for there is much hand fitting of the parts.

I still need to make and fit some drawer bottoms as well as the back and fit the skirt. Then on to finishing which will be burnt umber stain, and a top coat to be decided. I was pleased with the warmth of the varnish I put on the last chest of drawers and that may be the fate of this one.

Re: Bow front progress

#2

Re: Bow front progress

Dean J in MN

Fantastic work Bill! Looks like the cockbeading is going well!

Re: Bow front progress

#5

cock bead 

Bill Tindall


The cock beading is full width on the top and bottom edge of the drawer and about 1/2 width on the sides so as to reveal the dovetails and more importantly, not weaker the dovetails. This arrangement makes for a "1/2 miter" on the corner which is a bit tricky to execute, especially when the top and bottom cock bead is an arc. The lack of anything orthogonal on a bow front leads to all manner of complications. I cut this miter with a huge chisel used in pareing fashion (how is pareing spelled?) where the mass of the chisel aids control. The profile is band sawed, spoke shaved and then scraped. It is taking me almost 2 hours to do the cock bead on one drawer.

When I get the drawers done I intend to post step by step construction of the drawer. I could not find anything on making bow front drawer in the literature I had access to. Fortunately, we had people from the Headley shop stop for a club program and I was able to ask them some questions.

The piece has French Feet which I can show if interested. Not sure what other detail you would like to see.

Re: Bow front progress

#6

"Paring," it's gorgeous, want to touch it.

Pam Niedermayer - Austin, TX

Re: Bow front progress

#7

DANG, that's nice!

Bill Houghton, Sebastopol, CA