We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
I've grown quite fond of following industrial repurposings (fixtures, lighting, furniture) and tools as decorative objects in galleries, and am not at all surprised to find anvils in residential interiors, considering that I've long coexisted with a working example in my living space. Mine came from Sandy Moss, sees plenty of use, and cost far less than most gallery offerings, but I'll admit it projects a strong sculpturality. I could live without that saw-bookshelf, though.
Here's some other things I've come across recently.
There's a local gunstock maker that buys trees from the walnut orchards in the Central Valley* and mills them onsite. They sell the offcuts cheap, mostly as firewood. Years ago, a friend of mine, cruising the slash pile, spotted a six foot long, wide but thin slice taken from a crotch of one tree that was so lovely he tacked it up on his living room wall and let it warp as it dried.
One of the finer sculptural wall pieces I've ever seen. I wish I'd taken a picture.
*The major agricultural region of California, a flood plain valley, with very rich soil, fed by two watersheds and bounded by the Sierra Nevada on the east and the coast ranges of California on the west (with mountains at its north and south ends, too).
But then I've actually paid through the nose to have those same cheap offcuts shipped to me
I've always been a scrap junky, much to my wife's annoyance. Just as well I don't live in your area, I'd have shipping containers full of 4" long pieces of walnut in my backyard.
Re: Wandering off topic but staying with woodworki
Bob Hackett
My brother uses live edged planed boards as valances over the windows of his home.He sometimes wraps or drapes the cloth that forms the curtains parts of these boards.He also has stone slabs as table tops for coffee and end tables(he has a PHD in geology and works as a consultant).The combination is one I find incredibly wonderful.
Every summer we ship at least a dozen large flat rate boxes of old rusty tools I drag home from the dump back to Utah for him to use in sculpture.The postmaster here in town hates to see us come in together.
The end of our kitchen island/table is a slab from 2 white oak trees that crossed,rubbed together and then grafted to form an X.
I had originally sawed the X shaped graft in half and planned to use them as ends for a dining room table base but after finished the first one the wife talked me into using it to hold up the end of the island top.
I`ll get around to finishing the other one one of these days.
I've been collecting small and miniature boxwood woodworking tools for a shop display for some years, as I come across them. I'd put them in the living room, since they really form an altar; but every now and then I need to use one.
I'm with you, Scott. I used to get quesy because tool seller Falcon-Wood has a 'Decorator' button on their menu, although nothing's there now that probably belongs anywhere else.
$10,500 too steep for a stake in a busted stump? Maybe you didn't notice the copper-colored staples? Surely, that's the perfect value-added touch.
Well, I know where you're coming from. I'm not exactly the pathological hoarder type, but where b. sempervirens and fossil ivory are concerned, the vestigial tendency prairie dogs above the ground line. Mine is mostly pre-artifact, however; chunks, logs, and yet to be deployed bits.
While my jujus are squirreled out of eyeshot, unlike your arranged relics, I do get occasional pleasure furtively eyeballing and caressing them, carefully avoiding any sanctification which could spare them from eventual profane sacrifice to Ars Technica.
... about it all. I'm thinking of repurposing a tool for its Zen-like meditative repose as shown in this gallery picture. Crass of me to even wonder, of course, but if it costs enough it may even be worth it to the eventual buyer. If only mine had the patina, the wabi sabi of theirs.
I think I've mentioned before admiring, at a charity auction, a photorealistic painting of a Stanley transitional plane - the very model (No. 36) that I happen to own. I passed on the painting, although the artist did a very good job of capturing the spirit of this plane, one of Stanley's prettiest, in my opinion.
I am a fool for wood planes but the transitional planes are just too much fun in your hands to pass up.
I`m also a fool for socket chisels and anything made of boxwood or lignum vitae.OK,and ebony,curly maple and burl too.OK,OK,anything with figure in it,and rosewood,lilac or purpleheart .
If you mix shop and living spaces, Bob, you just might find Daniel Brush inspiring. He has a working collection of ornamental lathes in his apartment. While I eschew the daily Cheerios and pea soup, and while something of a neat freak, I sweep far less than the two hours Brush sometimes puts into his routine. I can relate, though, as I, too do gold granulation and loop-in-loop chain (under the microscope). You really do need to mentally prepare.
A sample of Brush's granulation (I consider him the best):
My wife calls me a "tool savior",never met a tool I didn`t feel was worth saving.
She also let it slip that she considers me the "Governor of the dump,always looking to hand out a pardon".Now my (former) buddies who work there are likely to wave and say "G`day Govnah!".
Women!You can`t live with `em and you can`t leave `em in the car with the windows rolled down when you`re done with `em!
That`s how I got stuck with mine for 40+ years and counting.
The two things that really interest me are tools and material.
With the proper tools and the right material you can make anything,providing you have the skill.
I never let lack of skill stop me.With practice you either become passable at something or smart enough to realize you never will be and there`s no sense wasting any more time there.
I have a hard enough time getting my hands to hold a hammer never mind placing micro beads with a single brush hair.
Got him beat on holding tighter machining tolerances though.My drill press will bore holes to hundreds of an inch easy but my lathe and mill will hold to + - .0002 if I`m careful. I suspect the reporter got his decimal place wrong.
I`d go along with Cheerios for breakfast for the heart benefits.I do prefer hot steel cut oats this time of year though.
The pea soup lunch has got to go though.I usually go with extra crunchy peanut butter on whole wheat fold overs.Quick,easy,nothing to heat and they leave one hand free to continue the work while you eat.Feeding the occasional crust to the dogs does distract me and slow me down on some days,though not too often.I make up for it by only sweeping and mopping every other day.
"Gotta admire that fella`s commitment to the work."
Commitment's the right word when you're that good. If it's toothpick models of the Tower Bridge, you could get away with calling it compulsion.
Ah, right... Suzanne got that wrong, obviously. 1/1000" was correct.
The single-hair brush is okay for the very finest granules, but only because of the way Daniel works, which is why the pea soup. The soup gives consistent viscosity with just the right organic content, allowing his saliva to affix the granules after lunch. Cereals also have the same effect. Puffed Rice, not enough stickum -- Cap'n Crunch, too much. I often use a very fine wire loop or a micro pick with a little thinned wallpaper paste.
It's not all about glue, though -- you need some proteins to dirty up the point of contact of the granule to the substrate to aid in fusing the 22k gold (alloyed to simulate alluvial or placer gold originally used in this technique). No solder is used. The controlled organic contamination introduced by the saliva* lowers the fusing temperature at the point of contact so the granule becomes one with the substrate without melting the granule entirely. Those ancient goldsmiths knew some stuff, it seems.
Most of my granulation is smaller work; jewelry, pipe stem bands, and so on. Takes nerve to do the really big stuff. One split-second too long with the torch -- all granules must be fused simultaneously in one shot -- no second chances, and it's a molten mess. Time to start over. Remelt, cast an ingot, hammer into a narrow cylinder, draw into fine wire, snip into paillons and bead into new granules with the torch.
"Love them floors! "
Yeah. To think I have to settle for terrazzo, these days (which I do like, btw). It's a Florida thing. All that sweeping? Just give me a Roomba�.
*or paste, or liquid hide glue with a bit of copper sulphate, etc.)
The two things that really interest me are tools and material.
With the proper tools and the right material you can make anything,providing you have the skill. I never let lack of skill stop me.With practice you either become passable at something or smart enough to realize you never will be and there`s no sense wasting any more time there.
I tend to under estimate the time involved with new projects; so some stuff sits around for quite a while before I get to it. Therefore, I try real hard to not accumulate lots of stuff that needs repair. More power to you.
Very cool. That is the second guy in the last few days that I have come across who has more than one ornamental lathe. I always figured they were impossible to come by...