New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

jointer fence - old vs. new

Posts

jointer fence - old vs. new

#1

jointer fence - old vs. new

Bill Houghton, Sebastopol, CA

Were I to get interested in a jointer fence, would I be better off with Lee Valley's design or an old Stanley, M-F, etc. model? Or is it just a question of which one's cheaper?

Re: jointer fence - old vs. new

#2

Re: jointer fence - old vs. new

Derek Cohen (in Perth, Australia)

Hi Bill

The Veritas jointer fence (whether the screw on to the BU Jointer or the clip-on version) has a fixed angle (90 degrees). You can shim it to other angles, but basically it is a one angle fence.

A fence such as the Stanley #386, on the other hand, is variable.

It depends on what you are after. Some will prefer the simplicity and reliability of the Veritas when all they want to do is square an edge. Others want moreversatility. And, of course, yet others may say why bother with a fence at all when all you need to do is practice.





Images from review of BUJ: http://www.inthewoodshop.com/ToolReviews/The%20Veritas%20Lee%20Valley%20Bevel%20Up%20Jointer.html

There is a bit more in the article.

Regards from Perth

Derek

Re: jointer fence - old vs. new

#3

I'd have to say go old school...

Scott Burr in Ben Lomond CA

I never tried the LV, and I can't see a reason to. It's not adjustable and I don't know if the magnets would hold in certain times. The beauty of these is to hold the plane at angles other than 90 deg.

I have a Stanley and a MF one. If your interested I will be getting rid of the MF one in a effort to simplify my life. Ping me off line if your interested in it.