Czeck Edge Bird Cage Awl
Todd Nebel
I thought I would share with everyone a recent addition to my woodshop. I read a review of Bob Zajicek's Czeck Edge Bird Cage Awl and decided I needed one. The additional accuracy and benefit of cutting the wood fibers when aligning and starting screw holes made a lot of sense to me. I placed an order for mine in January and asked about a special wood not available on the on-line ordering page. Shortly after, Bob and I were exchanging emails, he explained he did not have my wood selection but could personally select the stock that would be closes to my desire. A couple weeks went by and Bob sent me another email letting me know the folks who supply the blades were hit hard with the flu and there would be a delay in getting my order completed and shipped.
Today it arrived! I took a few pictures and thought I would share my initial thoughts. In keeping with the good customer service, Bob hand wrote a personal note and provided a diamond sharpener with his compliments. As you can see from the pictures the BC Awl comes in a nice clear plastic case with "CZECK EDGE Made In USA" on the top. There is another clear plastic case with spare tip protectors totaling 3. And there's a business card with a phone number to reach Bob with any follow up questions.
Now about the tool... The wood is Cocobolo. I asked Bob to select some stock with interesting figure. Hopefully that shows up in the pictures. The turning is perfect with just some slight tooling ghosting off the lathe to know it was hand turned. The finish is clear, smooth, uniform and hard. The brass ferrule is imprinted with "USA" and "CZECK EDGE". I like it when a tool says "USA"! The blade sides have a slight relief not to cut into your fingers. The tip does not and is sharp to cut the wood fibers and there's a micro bevel at the point. The shape of the handle looks oversized but I can tell you it feels great in the hand. I look forward to a lifetime of use from this tool.









