New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

cast iron polishing plate holder

Posts

cast iron polishing plate holder

#1

cast iron polishing plate holder

George in snowy Lowell, Mich.

This is what I made to hold my cast iron/diamond plate (I hope the pictures are attached). I took a 2x6 cherry board and routed out the inside with my router plane to make a holder like some whet stones are in. It keeps it clean, and looks good too.

When I want to use the bottom side of the plate, I flip the whole box over and remove the bottom. This way the two sides don't contaminate each other.

Work safe

George


img

Re: cast iron polishing plate holder

#2

Re:  polishing plate holder try #2

George in snowy Lowell, Mich.

picture maybe


img

Re: cast iron polishing plate holder

#3

Re:  polishing plate holder try #2

anotherBob

Looks nice George! Nothing like custom... hope you don't mind, I posted the larger images as I believe that only the thumbnail showed up here.:



Re: cast iron polishing plate holder

#4

Re:  thanks, anotherbob .....

George in snowy Lowell, Mich.

I'm not sure what I did wrong. I read the instructions but obviously I missed something. :^(

Work safe

George

Re: cast iron polishing plate holder

#5

Re: cast iron polishing plate holder

Bruce, a MN Galoot

After I scrounge up some cast iron, I hope mine ends up looking like yours.