Weekend's toys
Bill Houghton, Sebastopol, CA
I think the big chisel at the bottom of the picture below is a slick - the offset socket (all of which is "above" the back of the chisel) leads me to think that. The numbers on the stick are inches - this is one wide tool.
The striking hoop at the top of the handle was initially a little confusing - but I think this is a later addition, by someone who didn't want (or didn't know how to use) a slick. I'm inclined to saw it off and put a small furniture knob in its place.
At the top: a Peck Stow and Wilcox brace with "P S & W" around the top of a circular logo, and an 1895 patent date on the ball bearing chuck. Anyone happen to know when this logo was used? I couldn't find any useful information in my intertube searching.
An interesting ratcheting mechanism: the pawls can be pulled out with a fingertip (fingernail needs to be in good condition), or pushed back again. This allows for the usual settings: no ratchet, right ratchet, and left ratchet. It also allows for free-wheeling in both directions, a setting with no utility I can think of. It seems like it might, in theory, be bulletproof - but I've never encountered a brace with the conventional rotating collar that had failed any way except from rust, so I'm not sure that's a big advantage.





