Kind of on topic: Interesting clamp *LINK*
Bill Houghton, Sebastopol, CA
The clamp below is my latest garage sale trinket, a "bar clamp" designed to be clamped to 2x stock:

The clamp seems designed for temporary installation, so I take it this is a carpenter's clamp, for use on the job site, rather than a shop device. I own several bar clamp heads for shop use, and they're much less bulky.
It's well-designed: the raised ridges on the clamping faces really bite into the wood, far better than the funky little ridges on, say, a Stanley 702 "carpenter's vise" (example of this linked below, for those not familiar with it), which I have always found to have a rather light hold on the sawhorse. The heavy Acme screws help, too, of course.

I'm not sure I'll ever have much use for it; but it was way too cool to leave on the table at the sale where I found it.
I was intrigued to find that it clamps to modern nominal 2" stock, nothing larger; given its apparent age, I'd have expected more capacity, to clamp to historical thicknesses of nominal 2" stock (1-3/4" or even 2"). I did, though, find some markings on it, "No. 1" and "1-1/2", indicating that there were larger sizes. Perhaps this was for nominal 5/4 stock, a once more common thickness on the site than nowadays.
No other markings. Anyone happen to know who might have made it?
http://www.worthpoint.com/worthopedia/stanley-702-bench-vise-very-very-nice



