New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Speaking Truth to Power *LINK*

Posts

Speaking Truth to Power *LINK*

#1

David Barnett

Speaking Truth to Power *LINK*

David Barnett

I see one of us brazenly strives to bring light where there is darkness, to lead the wayward back to the fold. From but a mustard seed, these emboldened three, as of this writing, have come forth to publicly confess their devotion to Veritas, daughter of Saturn, mother of Virtue. Good work, Brother Bill!


Shepherd amongst the Heathens

Re: Speaking Truth to Power *LINK*

#2

Moses Yoder

Re: Speaking Truth to Power

Moses Yoder

The thought of making something entirely with hand tools at first glance is appealing to me. Then I come to my senses, and it makes no sense. For me the mixture of hand and power is the purest religion. Doing what makes logical sense.

Re: Speaking Truth to Power *LINK*

#3

David Barnett

Not until they pry the power cords...

David Barnett

,,, from my cold, electrocuted hands, no sir.

Me too, Moses. I've done it by hand tools alone, but much as I love and use hand tools, I'm a straddler, too. Do I hear a motion to dissolve Hand Tools and merge back into the main board? I'll bet not, heh. But there are apparently a number of knowledgeable hand toolers that keep to that side of WC. Have to read both, or miss something useful, I guess.

Re: Speaking Truth to Power *LINK*

#4

Wholeheartedly agree, but with one bit caveat:

Bruce, a MN Galoot

Hand tools and techniques are ever so much more fun to talk about.

Re: Speaking Truth to Power *LINK*

#5

David Barnett

Ain't THAT the truth!

David Barnett

Re: Speaking Truth to Power *LINK*

#6

Two different camps

Bob Hackett

There are those who want to move thru a project in the most efficient way possible and get to the next thing on the list.That doesn`t mean they are content with being tied only to what is available in the router bit cabinet and the nearest big box store.

Then there are "purists" who what to experience what it was like to work only with hand tools and time is secondary to gaining that insight.

Somewhere in between are the guys who are happy to sit at either fire and gain what they can from each.They understand that the list is so long there is no way they`ll get to all of it in this lifetime.They look for both the enjoyment and the speed because they have a talent and creativity that`s being pushed by a growing list of people who admire their work and want to own some of it.They don`t want to disappoint their friends and family so they budget their time and use power for the grunt work then switch to hand tools so they get to enjoy the final stages of what they`re making and can use a hand tool`s control to create their own trademark touches that make their work unique.

I have seen some really cool stuff made from masonite and MDF using CNC equipment.It`s not something I aspire to do but that`s never kept me from admiring the thought and creativity that went into it.

Those folks just choose to use different materials and skill sets than I do.

Re: Speaking Truth to Power *LINK*

#7

David Barnett

Down a strange road

David Barnett

"Somewhere in between are the guys who are happy to sit at either fire and gain what they can from each. They understand that the list is so long there is no way they`ll get to all of it in this lifetime."

Two fires, more food. My bucket list has grown to fill a mini-warehouse. I'll take all the help I can get. 'lectrons am my friends.

"I have seen some really cool stuff made from masonite and MDF using CNC equipment.It`s not something I aspire to do but that`s never kept me from admiring the thought and creativity that went into it."

From solid wood purist to sheet goods aficionado, it's been a long, strange journey. Lately, for me, happiness is a warm stack of plywood. Glued-up stacked (and usually sculpted) plywood somehow suits my current design aesthetic. Ugly as sin? Kinda. Retro? Decidedly. But so is my house -- one of those Sarasota Modern open floor plans with glass from front to back to lanai to pool to jungle. Even my little scratch-built stereo amp is stacked BB (for now, anyway), to match other elements in the room. Call me crazy, but I'm even stacking piles of BB and resawing it into veneer. Coated with modern resins, I've avoided problems with swelling and ply movement.

Even so, I do a fair amount of hand tool work on these projects. Love those Kutzall bidirectional files, and planing it is actually fun.

Old, terrible cellphone shop shot (before the aluminum chassis were even brushed), but...


Not much "thought and creativity" in the way I've used it here, Bob. Pretty scary, huh? I imagine this likely affronts most everyone's sensibilities around here, but it really blends in, looking tres chic in its new Euro indy digs, and hey, it does match the lamps. :)

Re: Speaking Truth to Power *LINK*

#8

Re: Down a strange road

Bob Hackett

Strange is in the eye of the beholder my friend.

Living in the great north woods I can afford to be a wood snob.Who knows where I`ll be 10-20 years from now?

Perhaps by then I`ll be living in the metropolis, all my laminated chisels and plane irons will be rusting away and I`ll be throwing recyclable paper products(wood fiber) into a computer controlled shredder, mixing it with some water based polymer adhesive, shooting it like gunnite out of a stainless steel gun at plastic molds and calling it "wood art".

The horror,the horror. :(

Re: Speaking Truth to Power *LINK*

#9

David Barnett

Re: Down a strange road

David Barnett

"I'll be throwing recyclable paper products (wood fiber) into a computer controlled shredder, mixing it with some water based polymer adhesive, shooting it like gunnite out of a stainless steel gun at plastic molds and calling it 'wood art'."

Works for me, Bob. And I say, "if you have to aim it while you hold it, it's a hand tool, damn it!"

Re: Speaking Truth to Power *LINK*

#10

David Barnett

Still, though, after rereading, Bill's post...

David Barnett

... really is hand toolsy. Somethin' goin' on I don't know about? What gives? Is it something we said? Is it something I said? :| (worriedly sniffing my armpits)

Re: Speaking Truth to Power *LINK*

#11

I agree mostly...

Scott Burr in Ben Lomond CA

I prefer to use mostly hand tools seeing how I don't own a power joiner or planer. I'll never give up my bandsaw.

Re: Speaking Truth to Power *LINK*

#13

Let there be light ...

Derek Cohen (in Perth, Australia)

The point to using handtools is ...

1. My eyes see shapes and subtle angles that I cannot recreate on a machine. Handtools are point-and-shoot. Handtools can finesse a joint, dimension, shape that would take hours to set up on a machine (if one was so inclined ... and still not capture).

2. I certainly get more pleasure from using handtools because the end result is more readily "owned" as "my" skill.

3. I enjoy most the tactile experience of working with my hands (and especially since I spend so many hours talking and problem-solving in a chair during the day).

4. There is nothing like the quiet of a shop, broken only by the quiet refrain of soft piano or sax in the background, and the swish of a plane or the slicing of a paring chisel.

But ...

Powertools have a place in my shop as well. I see the point of some, like Adam, who go down the purely (or close to purely) non-electric path in the interests of historical recreation and insight. There are others for who "handtools-only" is a religeous affiliation. I appreciate their dedication, but lack their zeal.

I do not see using powertools as some sort of "moral weakness" nor a "shortcut" to a skill. We use jigs in both hand- and power construction, and at times that are entirely necessary. I would not like to work without my bandsaw, grinders, even tablesaw. I invite anyone to spend a day working with hard hardwood and remain loyal to their handsaws to dimension their wood. On the other hand, I use a power router very rarely, and generally think of powertools as belonging to the dimensioning stage (although I will also do this with handtools). I have a limited interest in discussing powertools. My website is about using handtools.

David, those plywood boxes are very striking. I will borrow the concept, if I may.

Which raises another point. I have worked almost entirely in solid wood, and now see the limitations of this. Fine woodwork is not simply about the tools. It is equally about the creative drive that lies behind the wielding of the tools. There is work, such as the laminations/veneers of David Marks and the veneers of Jim Krenov, as well as the "unorthodox" joint-making of Sam Maloof, that expand our visions. The drive to create something that exists in ones mind needs to embrace all methods.

Regards from Perth

Derek

Re: Speaking Truth to Power *LINK*

#15

David Barnett

OMG. Maybe it's time for a style transformation.

David Barnett

"Steam Punk meets the Brady Bunch!"

Have you no mercy?!

Once upon a time, there was a short-lived and unnamed trend which began in late '40s France. They were influenced by very diverse and strange architectural and philosophical interests; from Peter Behrens' power station and factory designs, to Viennese Secessionist furnishings, and so on. Mostly, though, these designers admired and reprised the Exposition Internationale des Arts D�coratifs et Industriels Modernes of 1925, simplifying (and some would understandably argue, cheapening) it just short of minimalism. Gone were most of the more laudable characteristics, the details, of the pre-war Art D�co, but they abstracted and streamlined the remaining elements in a very pleasing yet stark style.

If you imagine these plain little cases (and they are quite small), with a broad radius on each from corner, you'll get a greater sense of that. I've made both but found the hard edges worked better for this decor. These stupid boxes and similar lamps, devoid of practically any required skill whatsoever in their construction, are what people first notice and exclaim upon when they visit. Never mind the rosewood, the shagreen, the parchment. And never mind the hand-sculpted furniture details and the handwrought hardware. grrr Figures, though, 'cause I like them, too.

Anyway, it all comes back around. Now that industrial chic is waning, I can allow myself to like it more again.

But why am I telling you this, Scott? You godless Philistine! Steampunk? Brady Bunch? Bah!

Picasso is a communist. Neither am I. --Salvadore Dali

Re: Speaking Truth to Power *LINK*

#16

Re: OMG. Maybe it's time for a style transformatio

TomD

That is the difference between good design and good craftsmanship. I got on the train with Krenov, etc... And back then we were just leaving behind Swedish modern and a lot of other modern. But one has to know that craftsmanship wise a lot of stuff from the boudoir of the Sun King is a whole lot more difficult to make, if irritating to look at. One of my cousins was on the honours list last year. While waiting for the Queen they get held in a little anti-room, and briefed on protocol. In this room was a random piece of furniture of such extraordinary ornateness that it defies my attempts at description. Clearly very well made. Never seen quite so much gold attached to a piece of wood...

Anyway, as you say, for the punters a few alternating strips of wood and they go all gaga as though the maker was a genius. Plus that baltic birch plywood takes nice dovetails

Re: Speaking Truth to Power *LINK*

#17

David Barnett

Too long (no surprise there), and mostly about me.

David Barnett

"My eyes see shapes and subtle angles that I cannot recreate on a machine. Handtools are point-and-shoot. Handtools can finesse a joint, dimension, shape that would take hours to set up on a machine (if one was so inclined ... and still not capture)."

There's little I would add to your first point, or for that matter, the other three, Derek. You've pretty much nailed it. But your post really made me think about this, so I'll share some thoughts and feelings within your framework.

The seeing of formal subtleties are integral to craft as I experience it. It's the near-ceaseless making of even the smallest, fleeting aesthetic decisions and making those thoughts materially manifest that I most crave -- that mercurial intimate tango of mind and hand. I have a very hard time stopping, though. It takes real discipline for me to take breaks before finally giving into exhaustion. And even then, I'll stay frustrated until I can get back to it.

As for machines, while I sometimes enjoy using them, as I get older, more limited physically and less secure in my vision, (optically, that is), I'm far more comfortable with and grateful for hand tools. I've seen some extreme and appalling (and sometimes ingenious) examples of jigging, but for the most part, the end result too often leaves me cold. And I just don't have the patience for that.

"I certainly get more pleasure from using handtools because the end result is more readily "owned" as "my" skill."

For woodworking, this used to be far more important when I was learning than now, but it's probably a matter of time, as I still derive considerable pleasure this way in goldsmithing and even more so in glass sculpting, which is the order I came to them.

"I enjoy most the tactile experience of working with my hands (and especially since I spend so many hours talking and problem-solving in a chair during the day)."

"Often the hands will solve a mystery that the intellect has struggled with in vain." --C. Jung

I firmly believe the hand knows first, and in truly surprising ways. It has made the right chess move when I was utterly flummoxed, and started my opponent's clock before I'd even realized, much less analyzed, having made the move. And I certainly couldn't play piano if I was constantly aware of what my hands were doing, other than in that trance-like meta-managerial state. After cutting back on playing due to tendonitis and CTS, I was lost until I finally took up less demanding hand work. My need and appreciation for things haptic* reawakened and propelled me back to hand tools. I began working wood. And found that the hand in thrall to the unconscious can reliably produce beautiful work.

After talking and sitting all day, that makes complete sense to me. And when I began woodworking, and for a few years thereafter, I, too, enjoyed the benefits of greater mobility and freedom. Unfortunately, mostly what I do now is from a chair, and now am I not only entirely sedentary, I'm sitting in fixed, restricted positions, especially as I work long stretches through a microscope, which for all its advantages, does not promote much movement and affords no exercise at all. At least the years of piano for hours each day was physical enough to wear me out and relieve stress. Getting worn out at a jeweler's bench is quite a different matter.

"There is nothing like the quiet of a shop, broken only by the quiet refrain of soft piano or sax in the background, and the swish of a plane or the slicing of a paring chisel."

This is wonderfully true for me. At least in the sense that it's quiet when I need it to be. I'm generally alone with my thoughts and have only rare interruptions. While I can and do derive pleasure in shaping, carving, and other hand directed operations with power tools, it's those times when I just sit and think and imagine that have made craft most worthwhile. While there are times I love listening to music while working, I'm too often distracted by it. Also, I can't abide radio programming -- so unpredictable. Luckily, I have an FM stereo transmitter that covers my house, so I simply broadcast my own playlists to the shop radio.

"I do not see using powertools as some sort of "moral weakness" nor a "shortcut" to a skill."

I'm glad to hear it said this way. I think are too often underlying assumptions, one's of which we're not always aware. Of course, I still gall at derision from power tool elitists, but mostly it entertains me -- I've found woodworking stores especially good for this.

"I have a limited interest in discussing powertools. My website is about using handtools."

I'm pretty much that way regarding stationary tools, and while I do like some hand-guided power tools, small angle grinders, flexshaft rotary tools, and so on, they're not nearly so interesting to talk about as planes, saws, chisels, scrapers -- heck, even awls and marking knives are more interesting than power tools.

"David, those plywood boxes are very striking. I will borrow the concept, if I may."

Please do. I did. :)

Those little cases were therapeutically antidotal to my incessant and compulsive tweaking, tweaking, tweaking, by the way, and it was hard making myself do it. There are no craft challenges in making these, obviously. And cheap? Leftovers.

Lord knows they're disturbingly simple, but that was the point. The plywood cutoffs were already stacked and glued, so I bandsawed the electronics cavity and glued on the top. Let's just stop and savor that -- let it sink in. No joinery. None. Nada. And the chassis is just 1/2" aircraft aluminum. My only indulgences were turning the knobs and the anti-vibration stabilizers.

Later on, I built a 8-foot-long workbench for another room to support my Taig lathe, miniature drill press, a couple small buffers, and so on. The top is glued up BB (plies facing up, of course), with a huge ebonized red oak trestle base. The top couldn't have been easier to construct and I would urge anyone with limited skills and tooling to give the method consideration. Fast, easy, cheap -- and surprisingly pleasing to look at.

"Which raises another point. I have worked almost entirely in solid wood, and now see the limitations of this. Fine woodwork is not simply about the tools."

I gain tremendously from cross-disciplines. While I do love wood more than most anything, I love metals, stone, and glass almost as much, and enjoy way too many other materials to enumerate. Which is why I'm very mixed media in my approach to craft. But more to the point, I'm materials driven.

It's materials and combinations of materials that most stimulate me, which is why jewelry is a perfect fit. But I can mix wood, metal, glass, and leather in so many ways without getting bored or stale. A small wood cabinet with hammered or copper panels. Or a shagreen-covered table lamp. And on and on.

Of course, the irony is that I've become enamored of sleeker, more minimal design. With a few exceptions, I'd much rather look at George Nelson, Probber, Eames, Rhode or Noguchi than most furniture. Anything that goes with terrazzo, I guess. The further, and more deep-cutting irony, though, is the chairs and seating I most admire cannot contain me nor intercede for gravity. Damn.

Derek: "Okay... this would seem a good place to stop, and I see our time is up. Next week, then. You can pay on your way out."

David: "Uh... Okay. Right. Next week, Doc."

__________________________________________

*Some interesting reading on the hand as it relates to perception, thinking, learning, and craft.

Human Hand Function [Hardcover]

Lynette A. Jones (Author), Susan J. Lederman (Author)

Absolutely terrific.

The Thinking Hand (Architectural Design Primer) [Paperback]

Juhani Pallasmaa

The Eyes of the Skin: Architecture and the Senses [Paperback]

Juhani Pallasmaa (Author)

The Craftsman [Paperback]

Prof. Richard Sennett (Author)

Chapters on machines, the hand.

Hands [Paperback]

John Napier (Author), Russell H. Tuttle (Editor)

The Hand: How Its Use Shapes the Brain, Language, and Human Culture [Paperback]

Frank R. Wilson (Author)

Re: Speaking Truth to Power *LINK*

#18

Re: Wholeheartedly agree, but with one bit caveat:

Doug Trembath

And to use!!!

Doug Trembath

Re: Speaking Truth to Power *LINK*

#19

David Barnett

Re: OMG. Maybe it's time for a style transformatio *LINK*

David Barnett

"But one has to know that craftsmanship wise a lot of stuff from the boudoir of the Sun King is a whole lot more difficult to make, if irritating to look at."

Well, yeah. Quatorze and my crowd wouldn't have mixed well, plus I need sturdy, but I'd white-up, powder my wig, wear a big honkin' beauty mole and an itchy merkin if I could sit in one of those frou-frou pre-Rococo obscenities just to see how long it'd hold up. Oh, the humanity! Why it'd be like the day the Ivory sank.

"Anyway, as you say, for the punters a few alternating strips of wood and they go all gaga as though the maker was a genius."

It gets worse. I clone a Gaincard power amp from scratch, build exact copies of Konus "Essence" speakers, do it for under two hundred dollars, (that's right, $200) and what do people notice? They point to the LED on the power supply and ask in amazement, "Wow, did you do that yourself, too?"

"Strangle me, shoot me, run me over, whatever it takes! I'M IN HELL!" --Sam Kinison


Disaster at P&G

Re: Speaking Truth to Power *LINK*

#20

Re: OMG. Maybe it's time for a style transformatio

Bob Hackett

My brother,who is an accomplished woodturner and got me into woodturning so I would be compelled to make custom tools(which I did),Noticed that he had not a single piece of his brother`s(me) work among his collection of very fine,high dollar turning in exotic woods.I was surprised that he would want one of my offerings and told him to pick whatever he wanted.

Bill was rather exasperated to find that when people view his collection of fine work produced on high dollar equipment by well known turners they are often drawn to a simple spalted tiger maple bowl turned from a piece of rotten stump on an old Shopsmith 10ER made years ago by yours truly.

Why?Because "That wood is just so pretty!".

The moral of the story is;tools and skill be damned,buy pretty wood. :D

Re: Speaking Truth to Power *LINK*

#21

David Barnett

You're right, of course.

David Barnett

I'm cursed! I have this thing for quiet woods. Pear, box, ebony, and straight, narrow striped low-contrast walnut are woods to which I'm drawn. When I began, I craved figure. Curl and burl caught and exercised my eye. But as I grew to revere form more than surface pizazz, my taste in wood changed.

Some share my taste, but most do not. In moderation? Sure. Fine. I can appreciate tamo when tastefully used, and touches of satinwood. But my oh my, keep the sapele pomelle and the kewazinga. They just make me dizzy.

Oh, well... back to the burl. Just stuff some nice soft silver into the hole in that amboyna. It'll sell.

Re: Speaking Truth to Power *LINK*

#22

Carl Jung ...

Derek Cohen (in Perth, Australia)

"Often the hands will solve a mystery that the intellect has struggled with in vain." --C. Jung

Hi Dave

Are you aware that Carl Jung, the father of Analytical Psychology, was a woodworker?

I recall a biographical movie about 30 years ago that showed him in his workshop at home. I should I had paid more attention to that - silly me, I was interested in his writings! :)

Regards from Perth

Derek

Re: Speaking Truth to Power *LINK*

#23

Re: Down a strange road

TomD

Really cool! What is it? You say you have other pieces? Let's see them.

I love plywood... If I can be allowed another opportunity to pump this:

http://www.youtube.com/watch?v=BnLmKXY-FCg

That's some of the faster moving, cheapest ply around.

Re: Speaking Truth to Power *LINK*

#24

Moses Yoder

Re: Wholeheartedly agree, but with one bit caveat:

Moses Yoder

I would agree there isn't as much to learn in power tools. The finesse that can be learned with hand tools is probably infinite. Plus the Norm factor has everyone thinking woodworking consists entirely of power tools.

Re: Speaking Truth to Power *LINK*

#25

David Barnett

Terribly OT, but your email isn't working, Tom.

David Barnett

(I posted this here, Tom, because I didn't know where to email you.)

"Really cool! What is it?"

Even my little scratch-built stereo amp is stacked BB (for now, anyway), to match other elements in the room.

It was kind of easy to miss, I guess. Anyway, it's something I threw together a couple years back; a clone of the Sakura Systems "Gaincard" stereo power amplifier. There are cosmetic and power supply differences (mine has superior capacity), but all other features and circuits are the same:

World's smallest number of parts - 9 parts per channel ( excluding attenuators )

World's shortest signal pass length - 32 m/m ( including the length of parts )

World's shortest NFB loop length - 9 m/m ( including the length of the resistor )


... and so on. Here's the rest of the description.

http://www.sakurasystems.com/products/47amp.html

In a nutshell, this is a very high performance power amplifier for the solid state purist. In fact, there's no preamp, nor would I use one. No tone controls, no balance, no nothin'. Turn it on and away you go -- uncolored audio minimalism. One knob passively switches between five sources, the other is source volume. That's it. It's simply incredible. So fast, so pure, so clean, so musical. So very Japanese.

On the price list the amplifier sells for $2,250 and the power supply (half my supply's rating) for $2000. Like that's gonna happen! Both amp and supply came in at about $130 for identical parts to the Sakura, and that's with the bigger toroid. Nice not to have the overhead of a high-end showroom, manufacturing and advertising costs, huh?

The Konus Audio "Essence" speakers, with a single full-range driver in each folded transmission-line cabinet, selling for $5000 a pair, came in at about the same cost as the amp*, so here, too, I saved a pants load of spondulix doing it myself. And again, minimalist -- no tweeter, no midrange, no wolfer, no subwolfer. To top it off, it was a very easy and quick build, although I dawdled and stretched it out.

http://www.sakurasystems.com/products/essence.html

These gainclones, as they're often called, are a very popular design and a great beginning audio project, satisfying my criteria of easy, fast, cheap. I really love cheap. I'm very cheap. How's it sound? Heh.

"You say you have other pieces? Let's see them."

BTW, the amp looks much better in real life than in that photo, which shows it in the shop while bench testing it. The chassis was unbrushed, the case was grungy from being handled, and so on. Do I have a better picture? No. I've been threatening to buy a new camera for three years. Every time I try to decide, I get thoroughly peeved. Others have taken photos of the house interior for their own use, but I never bothered to have them scanned or ask for digital copies. Pretty lame excuses, I know. I'll eventually do the deed, though.

"I love plywood... "

Me too. Especially if it's cheap!

*If I put in the Jordan drivers the price will go up, of course, but nowhere near the retail. Maybe $300. Maybe less.