New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

completed projects

Posts

completed projects

#1

completed projects

McKay

I attended a class with Chris Gochner (FW frequent contributor) last week and have had a chance to put finish on the two projects that we did in the total hand tool class. We first did a saw horse that we could use to make the shaker step stool. I finished this saw horse with terra cotta, green and then black milk paint. I finished off with lacquer. (I know it is not period, but I had the gun set up for another project.)

I finished the shaker step stool by planing and then scraping. I finished it also with the pre-cat lac.

Great teacher and and a great time. :b

Re: completed projects

#2

Really fine craftsmanship, Steve!

Tom Colligan

Re: completed projects

#3

Re: completed projects

Bill Houghton, Sebastopol, CA

Now that's a classy sawhorse! Some definite character to it; not to be mistaken for a plastic one.

And the step stool is very nice. That design is so simple yet elegant, and you did a nice rendition of it.

Re: completed projects

#4

Re: completed projects

TomD

Very nice job. That was one of my first projects back in the 80s. used a plan from Thomas Moser's book. Another version, in Simon Watt's book is a good deal more challenging, and modern looking, but I have yet to give it a go, though it is sorta on the list.

Re: completed projects

#5

Moses Yoder

Re: completed projects

Moses Yoder

Let me make sure I understand this correctly. You built an entire project solely with hand tools, then sprayed the finish on with an air powered cup gun? The projects look good, but if I am assuming correctly something is not quite making sense to me. I would think that a hand tool project would be finished by hand.

Re: completed projects

#6

not a  purist

McKay

The old folks used wax as a finish but that does not mean that I will do the same. I love doing things by hand. However, I feel that one should use the best product that is at hand. I use shelac often, but I did not use it in this circumstance. If I would have, I would have used electrons to apply it. My air-less was primed and ready to go for the other three projects that I was finishing.

Re: completed projects

#7

Re: not a  purist

TomD

The sprayed one looked good to me. I thought it had been ebonized, and was hoping to catch up on the details of that process... Nice finish.

Re: completed projects

#8

David Barnett

This works really well *LINK*

David Barnett

Superb results. Easy, too. Van Dyke's quickly raised their prices on quebracho bark extract, though, right after the article, but 2 lbs will last a long time. I've used a heat gun to speed things along, but you need a light touch or you can scorch the wood.


Brian Boggs' quebracho bark method

Re: completed projects

#9

Leo Cuellar

Thanks, you saved me from...

Leo Cuellar

digging through piles of magazines to find that article, David! Although that can be fun, it often distracts me for so long I don't get anything done. :D

Leo

Re: completed projects

#10

Nice work!

Tony - Memphis

He seems like a realy nice fella in the videos I have seen. I always enjoy his articles too.

Tony

Re: completed projects

#11

David Barnett

I must have ADD, and it's getting worse

David Barnett

I get so derailed if I so much as look at old woodworking magazines, I can't finish one project before thinking about another.