QSWO cross: 2 things that are easier than I though *LINK*
wilbur
A friend of mine asked me if I could make a cross that would hang on the wall for him. After considering a couple of design options, I thought making a simple cross, 18" high, out of QSWO with the horizontal piece sitting a little proud of the vertical piece would be a good design.
Al Navas helped me with thinking about some of the details, and he generously sent me some QSWO that he had as a gift. I am so grateful to him for doing so. Thanks, Al!
So here it is. The joinery is not real sophisticated -- it's a simple lap joint, but the joinery and final prep of the surface was done completely with hand tools.

The two things that were way easier than I thought it would be were fuming the oak with ammonia, and making shellac from scratch for the finish. For the fuming, I used regular household ammonia in a tub (by the way, the bottle may say "lemon scented", but it still smells like ammonia), and built a quick and dirty frame to hold the cross above the tub. The whole setup was stuck inside a contractors garbage bag. I rolled up the opening of the bag, and put a chunk of wood on it to keep it from opening, and left it in there for 2 days. The color change was clearly visible after just being in the bag overnight, and was quite dramatic after 24 hours.
The shellac I used was seedlac from shellac.net. It was a simple matter of making a 1 lb. cut by mixing 1 oz. of the seedlac in 190 proof Everclear, letting it sit overnight, and straining it through some cheesecloth. I used a rolled up old t-shirt material to pad it on. The shellac dries so fast I got about 5 coats on in 15 minutes. Then I rubbed some paste wax onto the cross.
I have more info about the Everclear and the seedlac on my blog.
By the way, all the hand work was done with Japanese tools, which are not supposed to be used with ring porous hardwoods like white oak, as we all know. 
Using Everclear for shellac





