New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Glue-less Edge Joints

Posts

Glue-less Edge Joints

#1

Chris Scholz

Glue-less Edge Joints

Chris Scholz

When mentioning that Chinese woodworking does not use glue I always get the question how to edge-joint without glue.

On a recent trip to Southern China I had the opportunity to see a very nice example on what it looks like.

The Perl River Delta (roughly the triangle spanned by Hong Kong, Guangzhou and Macau) is quite pleasant in Winter but extremely hot and humid in Summer. Since electricity is quite expensive people there tend to use the AC orders of magnitude less than in the US. This puts quite a bit of stress on wooden furniture.

We noticed that one of the two beds in the apartment developed bad mold. Further investigation showed that one bed was completely made out of particle board the other had key parts made out of zhangmu (camphor). Moreover the bed made of camphor did not use glue.

Removing the mattress (which is surprisingly thin and rock hard, the first night is painful, eventually it becomes quite comfortable) it turns out that the mattress is simply supported by a wooden board.


The interesting part, at least for me, came when removing the board that is made up of three sub-assemblies.

Each sub-board is consists of 4 or 5 camphor planks that are held together with two tapered dovetailed clamps.


I have no information about the origin of this bed other than it was purchased locally, and most likely was built and assembled by a local carpenter shop using whatever tools were available.

In my opinion this is a clear example where traditional methods (edge-joint boards assembled without glue) are vastly superior to it's modern equivalent. Or in other words, methods that are perfectly appropriate for say Rochester, MN, are completely inappropriate to the tropical climate in Zhuhai, China. Unfortunately in the name of progress these traditional methods are rapidly disappearing.

BTW, the holes you see in the bed posts are not because this is a bunk bed (it is not), the holes are there to attach sticks to the bed posts that hold up the mosquito nets.

Thank you for listening.

Chris

Re: Glue-less Edge Joints

#2

Re: Glue-less Edge Joints

Pam Niedermayer - Austin, TX

Very interesting, Chris. Do the dovetails swell up in the humidity? So the bed(s) slats (for lack of a better term) are held together?

Also, thanks for your Chinese chisels post a year or so ago. As you can see below, David found a cache of them in Germany, so I finally will get some.

Pam

Re: Glue-less Edge Joints

#3

Re: Glue-less Edge Joints

wilbur

That's a very cool technique, Chris. Thanks for the pictures!

Re: Glue-less Edge Joints

#4

Stephen Shepherd

I don't see any pictures   

Stephen Shepherd

Re: Glue-less Edge Joints

#5

Jack Guzman from Maine

I see them 

Jack Guzman from Maine

Re: Glue-less Edge Joints

#6

Stephen Shepherd

I saw the pics elsewhere.   

Stephen Shepherd

Re: Glue-less Edge Joints

#7

Ellis Walentine

Have a look now

Ellis Walentine

Stephen, I'm not sure why the pix weren't showing up in your browser unless you have a security setting that is not allowing remote content. Chris linked directly to those thumbnails on another (galoot-tools.com) server, and they should have shown up for you. I took the liberty of putting the full size images on our server and linking directly to them. Now you should see the big versions of Chris's thumbnails. Let me know if you don't.

Ellis

Re: Glue-less Edge Joints

#8

Stephen Shepherd

That works 

Stephen Shepherd

Re: Glue-less Edge Joints

#9

Re: Glue-less Edge Joints

John M in Mid Mich

Don't quite understand the construction. Could you give us a few detail pics? Is the cross piece a sliding dovetail? Are the slats tongue and grove? or what? I like the overall bed design.

John

Re: Glue-less Edge Joints

#10

Chris Scholz

Re: Glue-less Edge Joints

Chris Scholz

Hi John,

here is a closeup of the, what do you call it, maybe "tapered dovetailed clamp" would be the most appropriate description of this joint?


Can y'all see this?

Re: Glue-less Edge Joints

#11

Re: Glue-less Edge Joints

Doug Trembath

Great post, Chris!

Can you describe the methods used to connect the parts on the headboard and footboard? Are they glueless, as well? My assumption, from the text, is yes, but it would help some of us to understand those methods, as well, if you wouldn't mind.

Fascinating stuff!

Re: Glue-less Edge Joints

#12

Chris Scholz

Re: Glue-less Edge Joints

Chris Scholz

I don't know about this specific bed, in fact I did not even look at the headboard and footboard. Like always, it's been a bit of a battle to take pictures. Hey laowai, how about helping us here instead of wasting your film. I hear things like that quite often.

A few days after moving this bed we went to a nearby hot spring resort and water park. Taking the public bus (#622 I believe) through Pingsha I noticed a few traditional woodworking shops along the street.

Needless to say that we got off on the way back. For me this was the first of the two highlights of my vacation in Zhuhai. Not much to see here but that's where it happened:



View Larger Map

I still have to sift through the photographs, process a few and tie it all together with a little narrative. So, first of all thank you very much for your interest. Please understand, work keeps me exceptionally busy right now and life just threw another one of the occasional curve balls.

Please stay tuned...

Re: Glue-less Edge Joints

#13

Your posts are always great

Bill Houghton, Sebastopol, CA