New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

New tool for the shop,from the shop

Posts

New tool for the shop,from the shop

#1

New tool for the shop,from the shop

Andy Lincoln,in Dearborn MI

Hi All,

WARNING !!Electrons were consumed in the making of this tool!!!

Today I set out to make an awl from various scavenged parts and pieces in the shop.A friend had bought a kit from Rockler which I was impressed with but with the parts and pieces I had laying around I figured to make my own.



I started with some 3/16" dia. stainless steel rod I had ,roughly ground a point with an angle grinder.

i then chucked the rod into my mini lathe and filed a sharper point and honed with diamond stones.

The wood is curly maple from Northern MI,purchased at Bell Forest Products,they are in the U.P. of Michigan and also on Woodfinder so I feel good about that.


I used a TransTint dye,dark vintage maple & amber to give the maple some color .I then applied CA glue and BLO ,similar to how I finish pens,sanded out to 12000 with micro mesh and added a mother of pearl strike button on the end..


Of course like all my other projects it took way longer than I expected .The Rockler kit went together well earlier this week and being frugal I made my own kit.IF I didn't have ss rod laying around the kit would be a quicker,more cost effective starting point

Thanks for looking,

Andy

Re: New tool for the shop,from the shop

#2

Ice Cool ! (er, cold) . . .

steve mackay

Is the furrel a pipe fitting or just pretty ? Whats the wood ?

Re: New tool for the shop,from the shop

#3

Very nice tool(s)

Bill Houghton, Sebastopol, CA

If I had about 500 of those puppies to spend at Lee Valley, I'd have a good time.

Very, very nice awl, too. The handle shape is really lovely, and the mother of pearl insert guarantees that you can't mistake it for store-bought.

Re: New tool for the shop,from the shop

#4

Re: Ice Cool ! (er, cold) . . .

Andy Lincoln,in Dearborn MI

The ferrule is a 3/8" compression fitting.I like the look of the ones that taper to the cone shape.

My local hardware store has then for $0.50/ea .

If I was more ambitious I would file/turn the hex flats off the awl.In a weird way I kinda like the chunkiness of the hex flats.

The wood is Curly Maple.

Re: New tool for the shop,from the shop

#5

Re: Ice Cool ! (er, cold) . . .

steve mackay

VERY clever ! I like clever. And you're right . . . I like the look of the hex. Makes it even more unique / one of a kind.

Re: New tool for the shop,from the shop

#6

Re: New tool for the shop,from the shop

Dominic in Buck's County PA

Nice work Andy!

I like the shape well as the "strike button".