New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Nearing the Last Lap

Posts

Re: Nearing the Last Lap

#2

only one word need be said....beautiful!

Stuart Hough

Re: Nearing the Last Lap

#3

Very nice, Derek!

Bill Houghton, Sebastopol, CA

A couple of comments:

1. Too late now, but had you considered curving the drawer front and apron vertically? Might have been interesting; might have been overkill.

2. The top feels a bit thin to me. That may resolve when you stain it. But, from the photo, it looks like it could use another 6 mm (1/4") of thickness.

Regardless, it's a lovely design and, as someone else commented, really creative reuse of previous work. Don't waste: redesign.

Re: Nearing the Last Lap

#4

Re: Very nice, Derek!

Derek Cohen (in Perth, Australia)

Hi Bill

Thanks for the critique.

The top is actually quite thick. The photos do not show this yet - I will provide details once it is all done - but what you can distinguish of the top here is the top 35% of the total thickness. The remainder is bevelled at 45 degrees. The idea is to create a sense of the top floating on the carcase.

This is a difficult table to photograph, not just because I am using the camera flash, but because the angles and shape alter as you move around it.

Curving the drawer would have been overkill. As it is I feel that the curved ends of the top may be too much (or, that is how it looks in the photos). I used the template from the legs for the top ends. I am thinking of calling it "the end table with straight curves" :)

Regards from Perth

Derek