Saw Sharpening
Rob in KS
I think I heard that Mr. Law is no longer sharpening for others. A new small town framer I know has a couple miter box saws that need a good sharpening. Any recomendations on who to use?
Thanks
Knowledge You Can Build On — Est. 1998
Saw Sharpening
Rob in KS
I think I heard that Mr. Law is no longer sharpening for others. A new small town framer I know has a couple miter box saws that need a good sharpening. Any recomendations on who to use?
Thanks
Re: Saw Sharpening
David Weaver
Daryl Weir would be my first choice based on the pictures of his tooth lines. I think he probably goes way above and beyond what he should do for the cost.
Marv Werner here does a good job, too. I don't know how many of the boutique saw makers still do sharpening (the wenzloffs and such), but they may also be a choice.
There are probably scads of people who could sharpen those saws competently, but there is no real money in doing it (so they have no interest), and gambling could leave you out money with a saw with nasty teeth.
A miter saw isn't a great saw for someone to learn on given that it's crosscut and they have so darned many teeth (they are my least favorite thing to sharpen), but at some point, the guy might want to learn to sharpen them on his own. Shipping a saw two ways is not cheap.
Re: Saw Sharpening
Rob in KS
Thanks David!
Yes, this person has just bought out an old framer and doesn't know a whole lot about things like sharpening saws. I got her chopper blades sharpened but these two saws have a couple broken teeth and need a good basis to start with.
I'll forward your suggestions on to them.
Thanks a lot!
Re: Saw Sharpening
David Weaver
With broken teeth, I would be looking for someone who had a tooth puncher.
I don't know if the guys I mentioned have foley punchers, but marv is here, so he can answer that pretty easily. Off the top of my head, I do think Daryl has a tooth puncher.
I have recut teeth in saws that size with small teeth like that, with files, because I don't have a puncher. it's a miserable job and a waste of files. It may be cheaper for the person with the boxes to find a sharp saw. Not necessarily on ebay, but at flea markets.
I've gotten my big miter saws from my dad, who frequents fleas (i generally don't because I don't like to go somewhere without a purpose, and fleas are a better place to go if you're looking for bargains and don't know what they are before you get there). He has gotten several sharp miter saws for a few bucks, which is generally his strategy for keeping his miter box going instead of sharpening them. When they get dull, if he hasn't got a sharp one on hand or hasn't been to the flea in a while, I'll sharpen a saw for him in exchange for one of his dull ones. I don't think he's paid more than $3, so he doesn't care about giving one away to get another one sharpened.
If the person in question decides to buy saws, make sure they're the same size - saws too small for a box will have extra play and saws too large for a box may not fit between the guides due to the thickness of the plates, even if it looks like the guides are tall enough.
There are more saws than boxes, though, so don't pay a lot for one.