Saw Files?
Thomas Norton
I need to enter the arena of saw sharpening and need a source for files.
Would one of you guys have a good source?
Thanks!
Knowledge You Can Build On — Est. 1998
Saw Files?
Thomas Norton
I need to enter the arena of saw sharpening and need a source for files.
Would one of you guys have a good source?
Thanks!
Re: Saw Files?
Chuck Nickerson
By my definition, Tools for Working Wood is a good source.
They keep an eye on quality, and prices are reasonable.
Re: Saw Files? *LINK*
Moses Yoder
Pete Taran has a good article on this site on sharpening saws, see link below. I thought it mentioned that he sold files but I didn't see it when I scanned through.
Saw Sharpening
Re: Saw Files?
David Weaver
The woodworking retailers are generally not competitive on the price of files, and they are a consumable so there is no reason to pay a lot more for the same thing. If you start rehabilitating saws or reshaping teeth, the costs will add up fast.
McMaster Carr is a lot cheaper, and I have only gotten nicholson (in larger sizes) and Grobet swiss files (in smaller sizes) from them (they do not list brand on their listings, but they will not sell you junk).
Another option that is inexpensive is Mike Wenzloff, I believe he sells grobet and simonds - both quality saw files.
There is no good reason to pay more than $4 or $5 for a taper saw file.
Re: Saw Files?
Thomas Norton
I looked at McMaster/Carr but they donot have files for 20 TPI.
But thanks for the lead.
Re: Saw Files?
Bob Entwisle in NJ
Thomas,
Here is a link to a source for saw files, I've no experience with Tools and Supplies, but their prices are attractive.
http://toolsandsupplies.com/categories.asp?cat=214
Lie-Nielsen has saw files as well as a handy guide for choosing the right file for a particular TPI etc.
http://www.lie-nielsen.com/catalog.php?grp=1351
I purchased an assortment of saw files from Tools for Working Wood a while back.
http://www.toolsforworkingwood.com/Merchant/merchant.mvc?Screen=PROD&Store_Code=toolshop&Product_Code=EE-555-SF.XX&Category_Code=TRR
So far my saw sharpening has been limited so I've not needed to replenish my files yet.
Bob in NJ