New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

A little off the edge please . . .

Posts

A little off the edge please . . .

#1

A little off the edge please . . .

steve mackay

I thought I saw a couple posts that this little devil might not have as much use on "grown-up" scale projects but for the us "odd-balls" is sure is keen ! Had to try it out this morning right after the festivities ('bout as soon as it was un-wraped !). As opposed to sanding this gives nice, crisp and EVEN lined edges along the entire length. Probably wouldn't have gotten it for myself but since its in the house now . . .

Who else got new toys ? AND have you snuck out to the shop to try them out yet ?


Re: A little off the edge please . . .

#2

Toys and joys

Bill Houghton, Sebastopol, CA

6" swing Goodell-Pratt brace, about which I'm going to be posting another day for advice; Stanley 52 spokeshave, older and crispy; Stanley 120 block plane that'll get cannibalized for my 140 (knob and possibly other parts); Stanley 192 needing an iron. Little fun stuff.

In about an hour*, the boys will come over for brunch/lunch, and then we'll probably go out to the movies. That will be nice.

*Our older son's concept of time is a bit vague, so "In about an hour" means somewhere between one and two hours from now.

Re: A little off the edge please . . .

#3

Paul Kramer

Re: A little off the edge please . . .

Paul Kramer

All,

This has been the best Christmas in many, many years. In addition to completely surprising my wife with a necklace she wasn't expecting, she blew me away with not just one but two Sauer & Steiner planes. They are totally beautiful. I expect the pictures my daughter took of my caressing them will be circulating on the net soon.

Paul

Re: A little off the edge please . . .

#4

Re: A little off the edge please . . .

Alexander Grigoriev

"I expect the pictures my daughter took of my caressing them will be circulating on the net soon."

In the tool pr0n category? :)

Re: A little off the edge please . . .

#5

I am sooooooo jealous!!! Nice wife!

Stuart Hough

Re: A little off the edge please . . .

#6

WOW ! (drooling)

steve mackay

Re: A little off the edge please . . .

#7

Ellis Walentine

Over the top

Ellis Walentine

Paul, your wife is a gem, but you know that. Nice score, buddy. Use them in good health.

Ellis

Re: A little off the edge please . . .

#8

You'll love the GP 6" brace.

Chuck Nickerson

Unless I'm cranking a large drill, the GP 6" and a Fray/Spofford 7" are my go-to braces.

Re: A little off the edge please . . .

#9

GP 6" brace has a little problem

Bill Houghton, Sebastopol, CA

I haven't sorted it out yet, but the jaws tend to pop out of the shell (collar? thing that turns around and screws onto the spindle and tightens/loosens the jaws?) at a certain point. I don't know if some ingenious previous owner put a different shell on, or ran into problems and opened up the opening too much, or what. It appears that shell chucks use relatively standardized sizes, so maybe another shell can go on.

Suddenly, our current building project has gone into higher gear because our contractor son has some time, so it may be days/weeks before I can tinker with it.

Re: A little off the edge please . . .

#11

Jack Guzman from Maine

Christmas rust

Jack Guzman from Maine

Part of my Secret Santa gift was four wooden planes. A small smoother,two molding profiles and a groove plane. All four had rusty irons and wedges that were stuck.The two molders turned out to be A. Mathieson's.Rust cleaned off nicely and after a quick scrape to each side with a float the wedges fit fine. The groove plane and smoother are both Robert Sorby made with the Kangaroo logo.These also cleaned up nicely. The smoother is still a work in progress however. It appears the wood shrunk a bit. The iron is just a hair too wide for the body.Markings on the iron and body match up so I think they belong together. I'm going to wait awhile to let the wood equalize to my shop climate,then work it with the float til it fits good.All four still need more work,sharpening,etc. but I'm in no hurry.

I have plans for all four of these. I love renewing rusty tools back to good health,so this turned out to be a perfect gift for me.---Jack

Re: A little off the edge please . . .

#12

Re: Christmas rust

Bob Hackett

I`ll keep that in mind for next year Jack.

I had this Miller`s Falls adjustable mouth block plane sitting on the shelf for ages.It was sitting because I have both a low angle and regular Stanley block planes with adjustable mouths and knuckle joint lever caps that are my go to planes.The #65 was in almost mint condition when I got it so it`s especially nice.

That little Millers Falls was just collecting dust so I hit it with the Scotchbrite wheel,waxed it and sent it south for the next owner to sharpen as they saw fit and use.It was too nice a plane to just be neglected.

Hope the person I drew for Secret Santa puts it to use.It felt like it wanted to go back to work.

While looking for things for my wife at the local flea market one of the sellers I had bought from in the past waved me over and pulled 2 wood planes with no irons from a box under the table.They were very heavy for their size and he smiled and said "Lignum Vitea,isn`t that what you called it?" as i had bought a spar plane from him made of lignum a while back.$5 for the pair.

Well,one was lignum alright but the smaller of the 2 smoothers turned out to be what I believe is Live Oak as I`ve only seen 2 other planes made from this type of wood.Both the planes I bought are craftsman made and whoever made them did an excellent job.

They cleaned up very nicely and I have irons to fit them both.The little Live Oak smoother I will keep.It got a near full length Moulson Brothers iron and chip breaker.

The Lignum may become a gift for my brother.I have to think about how the wood will react to the dry Utah air.It may be best to keep it here in Maine with it`s spar plane brother. ;^)

Beep-beep.