New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Derusting auger bits

Posts

Derusting auger bits

#1

Derusting auger bits

Bill Houghton, Sebastopol, CA

I've got a bunch of auger bits I'd like to clean up. So far, a vinegar soak (my latest and generally successful rust-removal experiment) has gotten the majority of the rust off of some bits, but getting to shiny pretty hasn't gone so well. Steel wool falls apart fairly quickly, as does the 3M steel wool substitute; sandpaper can't get down into the grooves. I tried belt sander belts torn into strips, but the finest I could get locally, 120 grit, is too coarse (wiped out part of the maker mark on one bit).

I've considered abrasive cords/tapes - although they're kinda pricey - if I can find them locally.

People say mean things about wire wheels on a bench grinder, but I'm considering this next.

Thoughts?

Re: Derusting auger bits

#2

Re: Derusting auger bits

David Miller from Iowa

Nothing wrong with a wire wheel - I personally like the stiff, coarse coiled ones - it works faster and is easier to get an even "shine". I use mine almost every day. I suspect the bad rap comes from ruining the patina on collectable tools, but cleaning up some auger bits doesn't fall into that realm.

Re: Derusting auger bits

#3

I seem to remember...

Scott Burr in Ben Lomond CA

Some one filling a tube or bucket with dry sand and placing the bits into a 'lectric drill and going to town.

Re: Derusting auger bits

#4

Re: Derusting auger bits

Marv

Bill,

You probably just want to shine them up, right? Not wear off the edges?

I'm thinking grinding compound, like what is used for grinding valves. You can buy fine and course.

I used a smear of fine to clean the threads in that Yankee 1530 eggbeater drill we were messing with last week.

You might try using the grinding compound either with a rag or maybe 0000 steelwool. Try to not grind too much on the edges of the flutes.

If you have an electric drill motor with variable speed, turn the auger bit slowly and grind from the chuck end to the business end of the auger bit. Might have to run it in reverse.

Marv

Re: Derusting auger bits

#5

Re: Derusting auger bits

Bruce, a MN Galoot

Do you have access to a bead blaster? I had one at my last job, and it would clean positively anything. The medium was teeny glass beads that wouldn't degrade a metal surface.

Re: Derusting auger bits

#6

Re: I seem to remember...

Kevin French, Henniker, NH

I use a bucket of sand and some old engine oil to clean my shovels off with. I'll bet the bits would work in there also.

Thanks forr the idea, I won't bury that bucket so far away for the winter.

Re: Derusting auger bits

#7

Re: Derusting auger bits

Bob Rozaieski

For the lead screw, just start to bore a hole in a piece of wood. Stop when the spurs touch. Then pack the hole with loose SiC, valve grinding paste, sand, polishing compound, or whatever else you have. Then run the lead screw into the packed hole through your polishing medium of choice. When the hole gets too big, just start another one.

For the flutes, I like a soft wire wheel in a drill press to get the heavy crud out followed by a trip to the muslin wheel charged with some kind of polishing compound to make the flutes smooth and keep the chips from jamming.

Re: Derusting auger bits

#8

Or....

David Miller from Iowa

These are so cheap you can probably buy a decent set on eBay with no rust for much less effort and only slightly more cost than the remedies offered here. Not saying that I haven't spent hours restoring a rusty bit of something that was barely worth it.

Re: Derusting auger bits

#9

What??!!!???

Bill Houghton, Sebastopol, CA

Are you suggesting I use my time efficiently? The very idea makes me kind of uneasy.