New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Joint terminology *LINK*

Posts

Joint terminology *LINK*

#1

Joint terminology *LINK*

Bill Houghton, Sebastopol, CA

Can anyone explain to me how an open mortise/tenon, traditionally known* as a "bridle joint," has come to be a "bridal joint?" Almost more irritating than references to a rabbit joint.

I think of a bridal joint as one of those places where the young women go to decide how to spend far more money on their weddings than makes any possible sense.

*I've assumed for years that the name grows out of the joint's resemblance to the mechanics of a horse bridle. At least one other person thinks so too; see linky.


img

I'm not alone in my belief as to origin of name

Re: Joint terminology *LINK*

#2

No clue...

John in NM

I suspect names become corrupted this way due to people not reading/thinking much. I've never seen it called "bridal", but then I don't get around the net much anymore. That's just plain absurd.

Similarly though, about 10 or 12 years ago, a friend and I were discussing making really big clean holes in steel with a machine lathe. Another friend walked up, and knowing nothing about machining, asked why on earth we were discussing where to find a good boring bar. :D :D :D

Re: Joint terminology *LINK*

#3

Stephen Shepherd

It is a lovely marriage.

Stephen Shepherd

Re: Joint terminology *LINK*

#4

Re: No clue...

Bill Houghton, Sebastopol, CA

Boy, that trumps my question!

Re: Joint terminology *LINK*

#5

Jesper, Denmark

Re: Probably phonetic spelling.....

Jesper, Denmark

There is a tendency to misspell words that sound identical but have quite different meanings.

Another example is principle and principal. The meaning of the first is most commonly used, but often misspelled as the second.

Re: Joint terminology *LINK*

#6

Bridle Joint - Link

R.J.Whelan

http://sawdustmaking.com/woodjoints/bridal.htm

Re: Joint terminology *LINK*

#7

My favorite ww'ing forum homonym

wilbur

On woodworking internet sites, I've seen "hobbyist" and "hobbiest" used interchangeably.

I think that is not grammatically correct. To my knowledge, a "hobbyist" is someone that engages in a leisure time activity for fun. On the other hand, a "hobbiest" is someone who is the most hobbi. ;)

Re: Joint terminology *LINK*

#8

Re: My favorite ww'ing forum homonym

Bill Houghton, Sebastopol, CA

And if you get into an argument over who's more active in the shop, you can say that "I'm hobbier than thou."

You're not alone in disliking that one.

Re: Joint terminology *LINK*

#9

That's my favorite, too!!!

Bruce, a MN Galoot

Re: Joint terminology *LINK*

#10

Here's a thinker...

John in NM

In the title (tidal) it's wrong, but throughout the text it is correct. Did the web author not read the text of the reprint?

I thought of another I've seen, though it is not WW related - "for all intensive purposes" instead of "for all intents and purposes".... :D

Re: Joint terminology *LINK*

#11

Not wrong phrasing

Bill Houghton, Sebastopol, CA

"I thought of another I've seen, though it is not WW related - 'for all intensive purposes' instead of 'for all intents and purposes'"

The first phrasing applies to anyone from New York city (and anyone who's hung out with people from New York will know what I mean).

Re: Joint terminology *LINK*

#12

Re: Joint terminology

charlie belden

I believe the "rabbit" joint is actually called a rebate joint in England or rabbet joint in the Americas. Why? Have no idea. As for the bridle joint - think horses jaws with a bit between them.

Another favorite is a cabinet carcass - rather than carcase.

Re: Joint terminology *LINK*

#13

The way I build

Bill Houghton, Sebastopol, CA

cabinet carcass is a more accurate description :b

Re: Joint terminology *LINK*

#14

Re: Joint terminology

Pam Niedermayer - Austin, TX

I think rebate happened first and it makes perfect sense, it's a rebate/return of some of the whole. It's rabbet that makes no sense and I have to translate it to rebate every time I see the dang word.

Pam

Re: Joint terminology *LINK*

#15

Re: Joint terminology

Dean J from MN

Those crazy French again! :)

rabattre - to make something lower.

German Rabatt.

Somewhere along the way we managed rebate/rabbet/rabbit.

Re: Joint terminology *LINK*

#16

And there I was...

John in NM

thinking I was going to get money back if I ordered a rebate plane... never did it though, cuz all the molding profiles were really boring :D

Re: Joint terminology *LINK*

#17

Re: Joint terminology

Pam Niedermayer - Austin, TX

OK, but I still think rebate a better translation into English. Here's the first use in English, OED:

1532 in L. F. Salzman Building in Eng. (1992) 578 To enter the plankes of the said weyre with rebates yn to the joystes or tymbars.

So it's possible that the French and German usages were built on the English, rather than vice versa.

Pam

Re: Joint terminology *LINK*

#18

Ellis Walentine

Yet another peeve

Ellis Walentine

Bezel vs bevel, referring to the angled edge of a plane iron or chisel. Mike Dunbar swears by bezel. As a matter of style, bevel suits me better.

Ellis

Re: Joint terminology *LINK*

#19

To my surprise,

Bill Houghton, Sebastopol, CA

it appears that Mike is dictionarily correct: it's the first listed definition in both the online dictionaries at which I looked.

Of course, the first one also lists "basil" as an alternate spelling, and I've never seen that used.

I was raised with "bevel," and I agree that it feels more right - and is an accurate use of the word, at least as a mathematical (geometric) term.

Re: Joint terminology *LINK*

#20

except that

Bruce, a MN Galoot

bezel just would NOT work in my pesto recipe. :D

Re: Joint terminology *LINK*

#21

Re: Joint terminology

Sgian Dubh

"Another favorite is a cabinet carcass - rather than carcase.

Charlie, both carcase and carcass are correct. Carcase is an archaic version of carcass. I recall when I used the word as a child or perhaps teenager I always spelt it carcase as that was how my teacher expected it. Nowadays I seem to use either spelling, sometimes using both versions in the same paragraph or piece of prose.

On the other hand I'm always fascinated by the use of words like planning (planner) and dinning for planing (planer) and dining. Slainte.

Re: Joint terminology *LINK*

#22

Moses Yoder

Re: Yet another peeve

Moses Yoder

Bezel is the word people use when they want to impress the audience with their astuteness. Bevel is used by those who don't care that much to impress the audience. If you keep this simple principle in mind it is easy to decide which word to use. Although I guess the word bezel is more specific in the fact it refers to the angled end of a tool, bevel basically means the same thing it is just a more generic term.

Re: Joint terminology *LINK*

#23

Effective communication

Bob Hackett

I thought the whole idea of words was to get us all to common ground.

If you are using a word that makes the majority of the people in your target audience go "Huh?" then how can that be effective communication?Bevel is more widely understood so why not use it for instructional purposes.

If you want to impress people and/or be historically correct then I would suggest you hop in your Wayback machine and find the first guy to make a sharp edged tool out of metal(probably a copper alloy like bronze),point to that area and see what he calls it.Then you can hop back in your Wayback and bring the proper pronunciation (probably in a long dead language) to your next class and wow all your new students with it.

Be sure you get a clay tablet with the appropriate maker`s mark from "first edged man" emblazoned on it authenticating your claims in order to ward off all those pesky archeologists who will try to brand you a liar and charlatan so they can further THEIR claims and and bids at immortality.

I`ll be sharpening my tools, honing their bevels and making things while I wait for you to return and inform me what I`m doing wrong. :D