New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

gooseneck scraper burr

Posts

gooseneck scraper burr

#1

gooseneck scraper burr

Jerry Gibbs

do I put a burr on a gooseneck jest like a straight scraper?

Re: gooseneck scraper burr

#3

Re: yes

Jerry Gibbs

Getting a burr on a gooseneck scraper is a skill I yet have to develop. I did get the concave surface sufficiently even with the scraper and finished with sandpaper.

Re: gooseneck scraper burr

#4

Re: yes

Bruce, a MN Galoot

It's not easy, given the curves, especially the inside ones. But just like a straight scraper, the key to a good burr is starting with a flat, square edge. That just more difficult to achieve with a curve, but it can be done. I'd try draw-filing the curve first, and then try to refine that edge with a slip stone. It doesn't take a lot of pressure with the burnisher. It might be useful to hold the scraper in a vise so you can use both hands on both the stone and the burnisher.