New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

An afternoon with new shop friends

Posts

An afternoon with new shop friends

#1

An afternoon with new shop friends

Derek Cohen (in Perth, Australia)

It's been 6 weeks since I spent any time building something in my shop (a gennou handle does not count). This afternoon I spent some time with a few new tools, which I thought I would share with all of you. Be warned, this post is picture heavy!

Some time back I had come across an interesting board at the local Borg. It was on the rack with pine, but it was unlike anything I had seen. I grabbed it as it looked like it would make an interesting box. Here it is cleaned up ...


So I prepared a piece of Karri (very, very hard wood ... similar to Jarrah in looks. This began life as ex-roofing timber).

Another use for a Veritas skew block plane - working across the grain ...


One of the new friends was this 3 1/2" adjustable square gift from Stu, a mate in Japan.


Stu had sent me three Koyamaichi dovetail chisels that Mr Koyama had ground to my specification - minimum shoulders - and I was looking forward to trying them out with the new gennou I had handled (posted recently).

I also got a chance to use the new LV mini edge plane. I thought that this would be useful when building small boxes with thin sides ..


Look at these shavings!


Back to the box. I had not cut a dovetail in about 8 weeks. I was determined that this would go saw-to-saw. No excuses ..


Still getting to know this saw, but it is real sweet ..


Now the other new tool was the production version of the Knew Concepts fretsaw I had some input into. This is 5" in depth, with a Titanium frame, and the blade angle can be set at 45 degrees either side as well as 90 degrees.



Lee has been supplying it with an Eclipse 18 tpi blade, one that I recommended. The combination is outstanding.



The chisels worked well ..


Look at the tight fit at the shoulder ..


Marking the cheesy pine was "interesting".


It cut easily but I was concerned how fragile it would be ..


Finished ..


Now would it go together?



Dovetails ..


The base is yet to be done. There is some pine left for that (after the lid is cut open).


Thanks for sharing this with me.

Regards from Perth

Derek

Re: An afternoon with new shop friends

#2

Nice looking wood...

Scott Burr in Ben Lomond CA

Made for a nifty looking box. Nice new friends too. Yes Derek, YOU SUCK!

Who made the new DT saw?

Re: An afternoon with new shop friends

#3

Re: Nice looking wood...

Derek Cohen (in Perth, Australia)

Thanks (as always) Scott.

The saw is a new-old friend, was a 60th birthday present back in January when I received matching dovetail and tenon saws from the family. Mike and his sons make such wonderful saws. This one is no exception.

Regards from Perth

Derek

Re: An afternoon with new shop friends

#4

Re: An afternoon with new shop friends

Philip Duffy

Derek, Your skills astonish me. Well Done! Phil