New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

The hits just keep on coming - another LV vise *LINK*

Posts

The hits just keep on coming - another LV vise *LINK*

#1

The hits just keep on coming - another LV vise *LINK*

Bill Houghton, Sebastopol, CA

That would be hits to our collective wallets.

Rob's elves must have decided the world needs more vises (not vices - there's plenty of those).

This one looks very interesting. I've been designing a wagon-type vise in the back of my head, since long before El Schwarz started touting them, and even have most of the materials needed. This one could be a real timesaver in installation, though.


http://www.leevalley.com/US/wood/page.aspx?p=66819&cat=51&ap=1

Re: The hits just keep on coming - another LV vise *LINK*

#2

Oh, wow! That sure floats my boat.

Pam Niedermayer - Austin, TX

Re: The hits just keep on coming - another LV vise *LINK*

#3

Re: The hits just keep on coming - another LV vise

ThomD

Oh come on, you know you really want this:

http://www.benchcrafted.com/vises.htm

I'm not convinced these things make good use of bench space. But I am planing on doing one on my next bench just because I cram stuff into the shop so thoroughly I don't really have room at the end of my bench. I want to put the actuator on the front. Still have a few years to wait for the wood to dry.

If you have the Woodwork issue with the pic of set Janofsky's bench in it, he has a simple version of this design using a veneer press screw. But it does require end clearance.

Re: The hits just keep on coming - another LV vise *LINK*

#4

Moses Yoder

Re: junior

Moses Yoder

I hope this is the junior version and they plan on making a bigger version. It seems to me the handle and main screw should be about twice the size, but I suppose it would work fine the way it is. It seems it would also be handy if the jaw of the vise could be raised and lowered.

Re: The hits just keep on coming - another LV vise *LINK*

#5

Re: The hits just keep on coming - another LV vise

Paul M.

I used to have metal bench dogs, but ditched them for wooden dogs when I tried to shave the tops off of them with my nice jointer plane. I still have the carnage scraped into the sole of that plane.

After that, I've vowed never to have metal exposed anything on the top of my bench. This vise does not tempt me at all. Look at all of that angry metal just waiting to take a chunk out of your planes! :D

Re: The hits just keep on coming - another LV vise *LINK*

#6

Re: The hits just keep on coming - another LV vise

ThomD

That's a good point, and the height of the dog does not appear variable. I wonder whether there is a workaround. Like the slots would accept a wooden pieces, or the dog is aluminum. or one could do an aluminum wood hybrid.

Re: The hits just keep on coming - another LV vise *LINK*

#7

alternate jaws

Bill Houghton, Sebastopol, CA

I wonder how the jaw is held in place. There are two holes, but no screwheads visible atop the jaw. Perhaps it's possible to make jaws using that hole spacing with pins or some such.

If Mr. Lee would wander in and shed some light, this could be resolved.

Re: The hits just keep on coming - another LV vise *LINK*

#8

Re: alternate jaws

Phil Joines

It looks like the jaw has two pins that attach it to the slide. The "view" shows it used at both ends and there is a round accessory jaw to replace the regular one.

Re: The hits just keep on coming - another LV vise *LINK*

#9

Re: alternate jaws

ThomD

Well the next Lee Valley product, given their predilection for the attach-your-woody-things on their planes or shaves, is that they sell a customizable pin assembly that will allow one to mount whatever kind of woody one wants. (Please send my developers fee to my LV account).

Re: The hits just keep on coming - another LV vise *LINK*

#10

Re: alternate jaws

ThomD

If there is any bite to those holes, it is likely that two short and fat screws driven into a piece of wood would serve to catch the jaw carrier. That's not going to make me rich! Speaking of which, what about accessory jaws that have some low teeth so you can set almost any size piece of wood onto the carrier and it will act as a soft jaw.

Re: The hits just keep on coming - another LV vise *LINK*

#11

Re: alternate jaws

Pam Niedermayer - Austin, TX

Maybe you could just use the screws to hold the wood for a real short setup?

Pam

Re: The hits just keep on coming - another LV vise *LINK*

#12

Re: alternate jaws

ThomD

How am I going to patent that?

Re: The hits just keep on coming - another LV vise *LINK*

#13

Moses Yoder

Re: patent this

Moses Yoder

Thom, you could always invent a new screw and patent that :b

Re: The hits just keep on coming - another LV vise *LINK*

#14

Beats me. 

Pam Niedermayer - Austin, TX

Re: The hits just keep on coming - another LV vise *LINK*

#15

Re: patent this

ThomD

I already have, they are really big, project sized, and the threads are on the inside!