A Handle for a Gennou - new article
Derek Cohen (in Perth, Australia)
I have posted this article on my website ...
http://www.inthewoodshop.com/ShopMadeTools/AHandleforaGennou.html

Regards from Perth
Derek
Knowledge You Can Build On — Est. 1998
A Handle for a Gennou - new article
Derek Cohen (in Perth, Australia)
I have posted this article on my website ...
http://www.inthewoodshop.com/ShopMadeTools/AHandleforaGennou.html

Regards from Perth
Derek
Re: A Handle for a Gennou - new article
Scott Burr in Ben Lomond CA
Nice looking hammer. I like what you did with the handle as well. With the bent in the handle how's the balance?
Lovely work, Derek
Ellis Walentine
Question(s): What is "standard" about a 300mm length handle? Or, more to the point, how does one determine the right handle length? Does it have to do with the weight of the head? The length of your arm? The distance that is comfortable for you when hammering a chisel? (My comfort zone is several inches shorter than a foot away from the chisel.) Accuracy? Inquiring minds want to know.
Thanks for another excellent article.
Ellis
Re: Lovely work, Derek
Derek Cohen (in Perth, Australia)
Question(s): What is "standard" about a 300mm length handle? Or, more to the point, how does one determine the right handle length? Does it have to do with the weight of the head? The length of your arm? The distance that is comfortable for you when hammering a chisel? (My comfort zone is several inches shorter than a foot away from the chisel.) Accuracy? Inquiring minds want to know.
Hi Ellis
Every store-sold gennou I have seen has a 12" handle (roughly). Of course this is not going to suit all.
Custom and customising tools is the name of the game. Making it fit your hand, your style .. There are no rules set in concrete.
So we need to look at the length, thickness, shape (circlular, oval, octagonal, rectangular ..) and mass.
I'd like a handle to roughly balance the head, but I cannot find wood that dense and heavy. This gennou head is a moderate weight (375 gm) and the Jarrah handle, while hardwood, is much lighter. If I hold it near the end of the handle, the head feels heavier. You like a short handle, which tells me you are looking for more control at the expense of power. Then again, who says one must hold the handle in the same place each time?
Several years ago I came across a photo of David Charlesworth using a Japanese bench or dovetail chisel. Watching his intense concentration as the gennou was held at a precise angle and used with precise downforce I was struck with the realisation that the whole point of these hooped Japanese chisels and the gennou was Precision ..... the gennou adds precision when using a chisel. It makes sense to me that the handle is not just a lump of wood - it is capable of changing the whole dynamic.
mmmm ... I think I ran on there a bit. Must remember to cut back on the medication ... 
Regards from Perth
Derek
Re: Lovely work, Derek
David Charlesworth
Derek,
I remember that photo.
The photographer took my glasses. So that look of concentration might just have been myopia.....
However that that type of chisel hammer is my favorite and I agree that it gives great control.
You suck by the way, that is a very nice hammer.
Best wishes,
David
Re: Lovely work, Derek
Derek Cohen (in Perth, Australia)
Thanks David
Interesting contrast - your myopia opening my eyes.
Regards from Perth
Derek
Re: related *LINK*
bugbear
Konrad Sauer's version
Re: Lovely work, Derek
ThomD
Ellis,
In Toshio Odates book he gives a formula where with the hammer head grasped in the palm of the hand with the handle projecting towards the elbow, the handle should be the same length as the elbow. Personally I find that a little long.