How to rehandle a backsaw
Marv
Just hate it when people drill hangy holes in the grip.


Knowledge You Can Build On — Est. 1998
How to rehandle a backsaw
Marv
Just hate it when people drill hangy holes in the grip.


Re: How to rehandle a backsaw
Derek Cohen (in Perth, Australia)
Yes .. it does lower the resale value a snitch.
Fine looking saw ... (snigger) 
Regards from Perth
Derek
Re: How to rehandle a backsaw
Moses Yoder
I have never seen a back saw where the spline wasn't let into the handle; are you sure that's the original handle? It looks kind of like it was slapped together by an amateur. Then someone drilled a hole through the handle; this makes no sense, as the hang nail could have just gone through the handle without drilling a hole in it.
Moses...I think Derek got the joke
Marv
At least they could have countersunk the hole
Bill Houghton, Sebastopol, CA
Re: At least they could have countersunk the hole
Bob Hackett
That would require a level of craftsmanship(and thought) several levels above the previous owner`s station I would say.
Paint it green and call it good Marv.I don`t see why you keep torturing yourself(and us) by dragging these mongrels home. ;^)
PS-How early do you get up to keep getting to the dump before me?
You early bird.
He's got to be getting up way early
Bill Houghton, Sebastopol, CA
to get to your dump before you do, Bob.
Re: He's got to be getting up way early
Bob Hackett
I have come to believe he has minions camped out in tents at the really good spots where all things saw related end up when they reach the end of the trail.
The used flat rate boxes stacked up at the curb each week are a tip off to this fact and that he also really needs to be recycling more than John Deere`s paint. 
Re: He's got to be getting up way early
Marv
I did in fact get up early this morning, around 3am. Went to the dump too. But of course I do that every morning. 
Marv
You and Scott are getting a bit...
Bill Houghton, Sebastopol, CA
is the right word indelicate?
Maybe we'll just call it eccentric.
Re: You and Scott are getting a bit...
Marv
Yeah, ya really have to keep a close eye on that scott... 