New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Plane ID

Posts

Plane ID

#1

Plane ID

Doug Trembath




I picked up four planes recently from my neighbor, and this #5 style stumps me as well as my much better informed buddy and his plane reference book. Can you guys help me ID this one? The first pic isn't the best, sorry about that.

The lever cap, has set screws on it, and is retained by a crossbar. The tote is textured.

Any help is appreciated, guys. I have only seen one of these, in a pic of a group of planes on Ebay that sold pretty cheap, so I have no thoughts of it being a rare or valuable plane, just wish to know it's heritage.

Thanks,

Doug Trembath

Re: Plane ID

#2

Re: Plane ID

Bob Hackett

Some of the things I do to research an unknown tool is to look for maker`s marks or patent numbers and then research those thru books and the web.

You plane iron may have a maker`s mark on the end opposite the cutting edge,raking light and a magnifying lens will help you read it.

I`d also pull the lever cap and iron out and look on the chip breaker,the underside of the lever cap and all areas of the frog for info as well as looking on the sole,especially just behind the frog,for dates or other info.

If you are completely stumped and get no responses from other members here then as a last resort I usually tote tools up to Davistown Museum in Liberty Maine and let Skip look at them.You may just want to send some pics though instead. :)

Clarence Blanchard just south of me in the Durham/Pownal area is also an excellent source of info.He puts out Warman`s Tools Field Guide as well as other books and periodicals.

Hope this is of some help.

Re: Plane ID

#5

Peter Nailed It

David Miller from Iowa

As far as value, it is certainly more than your average fare of planes. The market is off a bit right now, but yours is a reasonably scarce plane.

I won't go too far out on a limb, but if you got the whole lot of 4 planes for less than $75 you aren't going to get hurt. Just wait about 12 years until the economy is rolling again and you will be in very good shape. (This is what I tell my wife about planes I buy, but it isn't disingenuous if I really believe it, right?).

david

Re: Plane ID

#6

Re: Thanks, guys!

Doug Trembath

I knew some of you would recognize it. I rubbed some of the dust off with wax and steel wool, instead of going through the whole rigamarole of flattening, polishing, etc. Sharpened the blade, and boy, it cuts very smoothly as it is.

I don't worry too much as I said earlier about value, but this one may just be for show, since I have a number of well-fettled others to take up any slack.

Again, thanks for helping out!

Doug Trembath

Re: Plane ID

#7

Re: Thanks, guys!

Bob Hackett

Any time you`d like us to muddy the water for you we`re always here just waiting to dive in and splash around for a spell. :D