We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
Found this at a barn auction. The frog is attached to a round disk that rotates in the bed of the plane. It can turn up to 45 degrees either left or right. A knurled knob in front and lever behind lock the rotating cylinder in place.
No company name but there is the number 101 on the bed behind the frog.
According to "The Fine Art of Tools" by Sandor Nagyszalanczy, it was patented in 1907 by Foster and likely manufactured by Ohio Tool for a short time. Scarce as hen's teeth, and probably worth a bunch to a collector. The picture in the book looks identical to yours. Great find!
Thanks for the help! I was kind of hoping for rare and worthless. Rare and costly will probably take it out of user classification.
It's not quite perfect. Part of the foot of the tote has cracked off and the blade is a marked Stanley Ap'l 19.92.
Knowing the manufacturer I was able to find a pic of one. Mine has only the 101 in the bed, the example on the internet has seems to have more writing. Maybe this is an earlier example?
The blade is incorrect, obviously. The one in Sandor's book has an early Ohio Tool blade, which would have been laminated and tapered. It may make a cool user, but if you were to find the right collector (start with Rob Lee?), you might be able to parlay it into a whole shop full of less-scarce but more practical users.
You can't really do much harm. If you'd like, I'll loan you a more correct Ohio blade and you can take it for a test drive.
Nice plane - condition actually looks very good...it's quite valuable, so be careful with it. I wouldn't clean it, or do anything with it until you know what you have....
I think if it were me, I'd find the proper blade, and set it on my mantelpiece. I like old, unique things like that, but I don't think I'd really use it all that much... it's just too easy to turn the whole plane, so that feature wouldn't really do much for me.
The general rule is, no pictures, didn't happen. Your bride would be upset (as would you) to find out you didn't get married after all, so, to maintain the balance of the universe and avoid tipping into an alternate reality in which she winds up with Brad Pitt, you MUST post some pictures.
I hope that day was everything the two of you wished for.
That is very true. But I'm ok with it. Gizmosity is over-rated sometimes.
I have a lot of gizmos... and many of them are really cool ideas, sometimes very well executed, but exist as a solution in search of a problem.
I don't think that's really the case here. But sometimes, I get the feeling that gizmosity is the result of a wild hair, a lot of creativity, a work ethic, and a misguided attempt to market the results. The Chisel-Rasp is one such gizmo.
I dunno, I think the tipping point where I became a gizmo-cynic happened in 9th grade when I realized that my boarding school room-mate's ginormous swiss army knife, with all of it's gizmos, was still essentially useless, and had become so big in an attempt to be the ultimate gizmo that it wasn't even practical to use as a knife anymore.
I finally broke down and bought a (cheap) laser level when we did the kitchen cabinets, and it saved SO much time over the alternatives. So it's not a gizmo, but a useful professional tool.
I guess that's the distinction: once it proves itself, it's not a gizmo.
for non-galoot tools. I like them so much I bought them for both my son and daughter. Of course, my son think my daughter needs a better stud finder than the one she's been using