New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Stanley 9 1/2 Plane ???

Posts

Stanley 9 1/2 Plane ???

#1

Stanley 9 1/2 Plane ???

Steve Fitzgerald

I picked up a 9 1/2 Stanley ( I think?) some time back. It looks to be a Type 5 or later. It has the eccentric lever (no Pat. date). The lateral adjustment has no Pat date. It has a raised and curved lever cap that looks to have been Nickle plated not japanned with the cam lever to the rear. The body has the oval depression milled in the side. The "9 1/2" is not stamped into the body. There is no Pat. date cast into body. The name " Stanley" is NOT cast into the body. The cutter has a Trademark stamp that reads " L. Bailey's Patent Aug 31, 1858" and is configured like the "A" Tradmark in Walters book.

My question is what do I have, a mutt or something I simply don't know about. Plane is in Good + condition and complete.

Amy help is appriciated. Fitz

Re: Stanley 9 1/2 Plane ???

#2

Re:  Stanley 9 1/2 Plane ???

David Miller from Iowa

Probably a later Type (17?) with an early blade, and possibly a later lever cap. People switched parts around on these all the time, especially the cutters. Easier to dig through grandads tool box and find a sharp cutter than sharpen the one in the plane.