New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

*** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

Posts

*** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#1

Ellis Walentine

*** SURVEY:  THE IDES OF SEPTEMBER *** *LINK*

Ellis Walentine

Clint Searl asked a question yesterday that I think is a classic Ides survey question. In case you're new here, the Ides surveys are conducted on the "ides" of every other month. We ask questions about your woodworking preferences and opinions and publish the results in Woodworker West magazine.

Clint's question is simple and universal, and wide open to interpretation:

"What is your favorite wood and why?"


Don't hold back. Tell us what you really think, and thanks for participating.

Cheers,

Ellis Walentine, Host


Woodworker West Magazine

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#2

Re: *** SURVEY:  THE IDES OF SEPTEMBER ***

Bill Houghton, Sebastopol, CA

I'd said walnut in response to Clint's question, but not why: it's a sweet-working wood, just hard enough to make the work worth it but gentle enough not to be frustrating; it smells nice in working; it can have nice figure and chatoyance; and it's unbelievably pretty under a finish.

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#3

Stephen Shepherd

My favorite wood...

Stephen Shepherd

is the last wood I used to make something I sold.

Stephen

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#4

Re: *** SURVEY:  THE IDES OF SEPTEMBER ***

wilbur

I'll repeat my somewhat snarky answer in the other thread.

I like cherry and walnut, myself, with a nods towards walnut, unless it's a day that I like cherry, and excepting the days that I like white oak.

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#5

Re: *** SURVEY:  THE IDES OF SEPTEMBER ***

James Watriss

I'm really partial to the way Cherry looks when it's finished.

Despite myself, I think the same thing about White oak sometimes.

But I find myself doing a lot of work in Ash, because it's attractive, typically stable, and cheap.

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#6

Favorites!I don`t play favorites.

Bob Hackett

My favorite wood is the one that best fits the project at hand and that changes constantly.

There`s a whole big forest out there and while each tree has it`s own camp no forest is made up of only one tree(unless it`s a man-made non-forest).Pick a project and then do some research, look around and pick a tree that suits the project,your skills and the tools available.

We generally don`t make the same project over and over again unless we are doing production work(horrors!!),so why limit ourselves to using the same material time after time?If I was headed in that direction I`d be using steel and welding my projects.

Oh wait,I do that already,but only because bronze and stainless steel are so expensive.I love bronze,it`s my favorite metal. :D

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#7

Bubinga

Patrick Gibbons

Just because I like saying, "Bubinga!"

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#8

Re: *** SURVEY:  THE IDES OF SEPTEMBER ***

Marv

On a cold and rainy winter night, my favorite wood is firewood. Anything will do as long as it produces lots of BTU,s.

Oh, ok, on the serious side, for saw handles, I prefer Cherry (cheery?) Tight, tough closed grain, can be finished glass smooth and is nice to wheat carve.

Marv

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#9

Never trust the name!

Bob Hackett

Many names are given just to confuse and mislead.

Take Cocobolo for instance.You`d think a light and bubbly sounding wood named like that would be a joy to work,till you end up in the ER with respiratory problems and a killer rash that hangs on forever.

Wenge (sp) is another.The fellow I saw working it pronounced it when-gay but he was anything but happy to be working it.

Closer to home we have Oak.Any wood that is only one letter away from OK shouldn`t be that hard to plane or finish.Just sayin`.

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#10

Re: *** SURVEY:  THE IDES OF SEPTEMBER ***

Gary Roberts

Butternut and then cherry. Both in antique furniture and to work with.

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#11

Cherry

David Miller from Iowa

I agree with James Watriss � cherry.

Probably a psychological thing. My grandfather was a fantastic woodworker and made the most remarkable pieces, including dozens of large pieces, using rudimentary power tools � machines you wouldn�t look twice at during the flea market last weekend. He worked exclusively in cherry. When I was in "manual training� (shop) it was the obvious choice for me and the first things I ever made were of cherry.

I lucked into a huge volume of very nice walnut about 15 years ago and have worked quite a bit in walnut, but it always comes back to cherry for me.

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#12

Re: *** SURVEY:  THE IDES OF SEPTEMBER ***

Ron in Sterling, CT

I am very partial to the wood that fits the project. I have worked mainly in Pine, Cherry, and Walnut. All three have their virtues, and shortcomings. My most memorable experience came from working with some Olive wood I salvaged from a tree cut down in Arizona. The figure of that wood was nothing short of spectacular.

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#13

Re: *** SURVEY:  THE IDES OF SEPTEMBER ***

Bruce, a MN Galoot

Walnut, for workability , ease of finishing and consistency of grain. However, I'm kinda partial to cherry, too, especially how it becomes richer over time.

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#14

Ebony

R.J. Whelan

Because it doesn't take too much (in BF) to really add a nice counterpoint to a piece of furniture (or a tool). The affect can be subtle, as when working with a fairly dark principle material; or dramatic when working with something light like maple or pear.

I once had the pleasure of building a (low boy) dresser and two bedside tables entirely from Gaboon Ebony. It was a real challenge. Probably the only time in nearly nearly 50 years of professional and semi-professional woodworking when the material cost exceeded (eclipsed) the labor charge.

RJ

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#15

Jack Guzman from Maine

Re: *** SURVEY:  THE IDES OF SEPTEMBER ***

Jack Guzman from Maine

I really like Walnut.I like the look of it,the smell,and it's working properties. It is the best wood I've found for making clock cases.---Jack

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#16

Another Cherry Fan

Ron Bauman

When I was a restorer I was called in to refinish a 5 drawer chest with handkerchief drawers on top. The finish was so far gone that you could easily have painted the piece tan and made it out of pallet leavings and foregone the bother of working a fine wood. I am and was partial to gloss finishes and my customer concurred. Let us say that as I worked revealing the wood I was subjected to a mini-religious experience. The cherry had patinaed to a rich indescribable red-rust. I fell more in love as each coat of finish went on.Fortunately, My customer was similarly smitten and provided me with work until her passing some years further on. As many parents say, I love a lot of woods, but cherry has my heart.

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#17

Interesting how few woods are getting votes

Bill Houghton, Sebastopol, CA

The other boards are getting a few other preferences, but it seems that the basic North American hardwoods are getting the most votes.

I wonder what the vote distribution would be if this question were posed in, say, England, or Germany, Australia, South American countries, Southeast Asia, Japan, the Ukraine or Russia; the list of potential countries and regions is pretty big.

I have a sneaking suspicion that local woods would receive the same kind of favorable notice.

Ellis, I don't know if you have counterparts elsewhere - I know there are English and Australian fora, but my language skills are so limited that I haven't poked around to see if there are fora in the other countries I mentioned. Surveying in those countries and gathering the results would be very interesting.

He said, casually mentioning a very large project without offering to do anything on it...

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#18

wood is good

Patrick Gibbons

A well-repected rosarian was once asked what his favorite rose was. He answered that roses are not like women. You don't have to pick just one and stay faithful, you can have a whole host of favorite roses with no guilt. It seems to me that favorite woods are the same way. I've been amazed at how various woods stand out with one or more characteristic. Some of my favorites have been the incredible hardness and toughness of dogwood, not to mention how it polishes so well; I have some beautiful persimmon that has tiger striped; it's tough to work with but I've grown to appreciate more how versatile yellow pine is; recently I built a box out of sipo, an African wood that is a real joy to work with and very striking. I was once given a piece of ipe that might as well have been stainless steel, it was so hard. It's the incredible diversity of wood that makes it such a wonderful medium.

Re: *** SURVEY: THE IDES OF SEPTEMBER *** *LINK*

#19

Jim in Burlington Ont.

SO Hard to pick just One!

Jim in River Oaks, Ont.

Hi Ellis,

I would have to jump on the cherry wagon. I love how it works with my tools, easy at hand planing and a soft scent that makes me happy. The aging process is also like wine, ages to total environment perfection with the right environment.

Take care,

Jim