We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
Got these at a yard sale...paid too much for them but I still would like to know what some of them are. Some are obvious but the threaded job looks like it might be ...well I have no clue.
A little help would be appreciated. I'll post four posts for the planes, fist shot topside, second shot upside down.
The "threaded job" is the fourth over from the right, yes? From your two photos, I can't figure out what it is at all. A few separate pictures of it might help. The two sole profiles make no sense next to each other, from what I can see of it.
The plane with the screws is a sash plane. One cutter makes the molding on the sash while the other makes the rabbet for the glass. You can adjust the width of the plane to make sash of different thicknesses. The plane might have a range of 1 1/4 to 1 5/8 or similar.
I guess those are the screws you refer to. Adjustment screws for width...A screw with a lock-nut. Loosen the nut, make the adjustment, then tighten the nut.
Here in WC the image file size has to be no more than 80KB. That size file loads quite fast if you have broadband. Dial-up is another story. If the file size is more than that, it won't upload.
I learned that if I set my camera to it's lowest image size, the images will be less than 80KB fresh out of the camera. I hate having to resize my pictures.
Regarding your moulding planes.....wonder how the maker of those planes made the shape. Scrapers, maybe? Anyone know for sure?
On the making of planes: mother planes (the inverse of the profile), plow planes, on occasion regular old rabbet and h&r's. All were used to form the profile.
There's one with a brass threaded piece on top. I'll have to take a separate shot of that one. I think it might be a depth stop.
The half circles are fascinating, I'm used to seeing the regular hollows and rounds (like the one near the three half circles). These need two blades because of the tight radius. I wonder what the purpose was...perhaps spokes for a coach? I would have thought that spokeshaves would get the same job done with less fuss.
From what you can see in the photos are there any that you would consider a 'keeper". I am probably going to try to recoup my money on e-bay by selling all but one. I don't know why I bought them (yard sale fever?).
Wooden Plane Keepers defined: a tool you want to use, collect or someday trade; no missing parts; usable blade; profile is something you can actually use (how many nosing planes does one person need... if any?); you just like how it looks.
Factors to consider: was it an architectural, furniture, finish carpentry (aka joinery) or specialty plane and which of these is your area of interest?
More factors to consider: wooden planes are becoming harder and harder to find in 'new to market' condition.
Even more factors to consider: you can never have too many tools
"Wooden Plane Keepers defined: a tool you want to use, collect or someday trade; no missing parts; usable blade; profile is something you can actually use (how many nosing planes does one person need... if any?); you just like how it looks.
Want to use and collect
Factors to consider: was it an architectural, furniture, finish carpentry (aka joinery) or specialty plane and which of these is your area of interest?
architectural, furniture
Even more factors to consider: you can never have too many tools
Never tell your wife how many tools you have, which are for collecting and how much they cost. Every tool is needed to make something for her, the house, children, relatives, etc.
if you are a woman reading this, replace 'wife' with 'husband'
if none of the above, replace 'wife' or 'husband' with 'significant other'