New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Help, no quill lock

Posts

Help, no quill lock

#1

Dennis in Southern Oregon

Help, no quill lock

Dennis in Southern Oregon

I recently bought a Powermatic 18" VS drill press. I later discovered to my surprise that it does not have a quill lock, which makes drum sanding, routing, planing, etc. very awkward. :( Does anyone know of an aftermarket attachment or a reasonable way of modifying the drill press to add a quill lock capability?

Dennis

Re: Help, no quill lock

#2

Hi Dennis, No help, with your quill lock.

Scott Burr in Ben Lomond CA

This is the handtool forum. You'd have better luck on the "main" board. That said, I'd poke around MSC or McMaster Carr for a lock. :)

Re: Help, no quill lock

#3

Re: Hi Dennis, No help, with your quill lock.

Joe Rogers, Northern Virginia

My Grizzly is set up the same way and if you futz around with the depth scale and lock I think you can find a workaround.

JR

Re: Help, no quill lock

#4

Re: Help, no quill lock

Marv

Hi Dennis,

I just can't imagine any drill press without a quill lock. Is it just missing but there is a threaded hole where there used to be one? If not, I would remove the quill and drill and tap a hole in the side of the housing and screw a bolt with a handle on it in the threaded hole.

Marv

Re: Help, no quill lock

#5

Alas, way too many presses don't have a quill lock

Bill Houghton, Sebastopol, CA

Nowadays, this seems to be a feature available on industrial-grade presses only.

Re: Help, no quill lock

#6

Ok, that explains it. 

Marv