New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

'Repurposed' workbench? *LINK*

Posts

'Repurposed' workbench? *LINK*

#1

David Barnett

'Repurposed' workbench? *LINK*

David Barnett

The dealer claims this bench was "originally designed for the crafting of skis", although nothing so distinguishes its supposed specialty to my eye. Am I missing something? Aside from its French provenance, I naturally suspect cachet enhancement; a tonier term than bullshit colloquial to its new Texas home. Yippee.


Pour zee crafting of skis, non?

Re: 'Repurposed' workbench? *LINK*

#2

Well you know Dave...

Scott Burr in Ben Lomond Ca

One could have made skis on it. I know nothing of that craft when 20 ton presses weren't involved in manufacturing anyway...

Poor thing thing is probably going to wind up as a cutting board net to a BBQ pit :(

Re: 'Repurposed' workbench? *LINK*

#3

Re: 'Repurposed' workbench?

Thomas Skaggs, Foothills of Mount Level

Look at it, how could anyone make anything other than skis on that bench? I would not want it in my shop....way too specialized! ;-)

T.

Re: 'Repurposed' workbench? *LINK*

#4

Yep

roninkokomo

I believe your skepticism is warranted. Skis, in fact, may have been made here, but I see no design peculiarity for that purpose.

Re: 'Repurposed' workbench? *LINK*

#5

Ski bench?

Bob Hackett

An old Down East saying;

"Just `cause yoo-ah(your) cat has it`s littah(litter) in the oven,that don`t make `em biscuits"

Re: 'Repurposed' workbench? *LINK*

#6

Dale Lenz

Are you folks, blind, :")

Dale Lenz

Look at the tool tray, it was used to form/bend the skis.

Re: 'Repurposed' workbench? *LINK*

#7

It's obviously for skis

Patrick Gibbons

The sides on the bottom shelf are fashioned from ski blanks. The top of course is a French surf board blank. It's amazing what you guys don't know.

Re: 'Repurposed' workbench? *LINK*

#8

David Barnett

n' suth'n style...

David Barnett

I had a public defender friend win a hopeless circumstantial case with that line, although uttered in a Central Florida Green Swamp drawl:

"Just 'cause the cat had'uh kittens in the oven... (pause as long as you dare)... that don't make 'em biscuits."

Worked even better than his usual "sure he kicks his dawg, beats his wife and 'bothers' his stepdaughter... (pause)... but he's a good-ol'-boah�". Which can optionally be held back for sentencing.

The assistant prosecutor had just moved down from Nuh Hampsheah, btw.

Re: 'Repurposed' workbench? *LINK*

#9

Don`t get me going David

Bob Hackett

As you know,I spent an extensive amount of time in the Texas oilfields and those "Good ol` boys" had some very colorful ways of expressing their thoughts. :O

Clyde,a driller on one of the rigs used to wait till the worm(new hire) would say "I can`t".His reply was always;"Son,there ain`t but to caints out heer.If you CAINT handle,it then you CAINT stay".

Other than that Clyde was generally "Happier than a dead hog in the sunshine" till things went into a "Nine line bind" then he`d mutter,"I`m fixin` to twist off".

Too late,I`m "Spun up"! :D

Re: 'Repurposed' workbench? *LINK*

#10

David Barnett

Hadn't heard of nine lines on a block...

David Barnett

...or partin' the string downhole since I worked for Arco in AK. Waaay back. I love that stuff.

One guy from Arkansas used a peculiar figure of speech for "do you want". He'd say "nyunnuh doughnut?" The American language is so rich.

Re: 'Repurposed' workbench? *LINK*

#11

Re: Hadn't heard of nine lines on a block...

Bob Hackett

Some of the best phrases referred to the capabilities or potential of people.

If the person wasn`t motivated enough,"You couldn`t melt that boy and pour him on the work" or "That boy is pure-D SIL(son-in-law)"

One way of telling someone he had been accepted by the crew was to have the driller walk up to him and say"I guess you`ll make a hand".

A worker who was a flurry of activity and yet not getting anything done was "pumping agin` a choke","Not usin` his mule" or simply "That boy`s got his BOPs closed".

Re: 'Repurposed' workbench? *LINK*

#12

Bench Height

Thomas Skaggs, Foothills of Mount Level

On second glance the bench looks a tad shorter than normal. Clearly that was designed to compensate for woodworking in ski boots.

T.

Re: 'Repurposed' workbench? *LINK*

#13

David Barnett

Re: Hadn't heard of nine lines on a block...

David Barnett

"Some of the best phrases referred to the capabilities or potential of people."

Or lack thereof, right. The tits on a boar hog thing. Beyond the heirarchies of talent, experience and horse-sense, you have on-the-job nicknames, too, which can be simple and to the point but can be fairly cryptic, elaborate, and pejorative, as well.

And in a region where real names, I mean actual birth certificate baptised names like Booger and Bubba are not unheard of, that's saying something.

I wish my memory was still intact. Once in awhile one of those names will percolate to the surface and amaze me anew.

Re: 'Repurposed' workbench? *LINK*

#14

David Barnett

The more I think about it...

David Barnett

I can just about imagine the know-it-all customer who actually came up with that when he saw the tool tray.

Re: 'Repurposed' workbench? *LINK*

#15

David Barnett

I think you nailed it.

David Barnett