New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Cole Vise and Drill

Posts

Cole Vise and Drill

#1

Cole Vise and Drill

Jay Samuels

I picked up a Cole vise over the weekend. Interesting piece of equipment. It rotates 360 degrees in the vertical plane. I suspect with some minimal ingenuity, one could fabricate a base so that it would also rotate 360 degrees in the horizontal plane.

Nosing around the internet, I see that there was a drill assembly that went with it, that was supposed to be able to drill through pretty much anything, and work in all kinds of odd places. Anyone have any experience with the drill, so I can decide (irrespective of the fact I don't know what I would use it for) whether it is worth trying to find one?

Re: Cole Vise and Drill

#2

Of COURSE it's worth trying to find one *LINK*

Bill Houghton, Sebastopol, CA

but it becomes a question of how much time you want to spend in the effort.

Neat tool; I had forgotten about these. I seem to recall a catalog way back in the 70s that listed these. I couldn't afford to buy one new, then; don't recall what they cost, but we had way more month than money every month.

If I recall, they marketed them pretty heavily as farm tools - good for field repairs on your tractor and that sort of thing.

Some nice pictures at the link below.


http://www.oldengine.org/members/levans/colevise/