New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

After I'm Dead

Posts

Re: After I'm Dead

#26

Re: After I'm Dead

ThomD

"I just wonder if anything at all is likely to be remembered about me when I'm gone?"

Well not on this count. If you figure we are mostly following a path in hand work and tools set years ago when it actually mattered and very little is remembered of those people at all. What differs in our situation is modern media. While it is fun to laugh at people in reality shows, it often happens that those who get known get known for something that isn't recognizable to them, but that comes out in the editing. So whether facing the same stage of life you are, they feel the recognition they got is recognizable is another mater. Not in woodworking you say? What about Franz Klaus, part of the charm was the iliteracies like "the more you be...". I'm pretty OK about being unremembered, which is part of why I don't even post with my full name.

Re: After I'm Dead

#27

Re: After I'm Dead

ThomD

As far as the tools themselves are concerned, I remember early in my tool career, I left out some Ouchi chisels, the best of the best, reputedly in their day. I came back after work to find the guys who had changed out the oil tank in our basement had used one of the big chisels as a cold chisel to shear out mounts for the tank... Alrighty then... To only varying degrees, unless you maybe train up a child, anyone who comes to our tools will be the oil tank removal guys to some degree or other. Now maybe that sounds unresonable. If I was a worker at Chipendales (during the furniture, pre burlesque period), and I left my tools to another worker, there is some chance they would be used in the same vein. Those guys didn't spend decades arguing over the relative merits of microbevels, or japanese natural stones. For guys like us? No way the next user is going to be anything short of King Kong with Fay Rae, as seen by Cassanova.

Re: After I'm Dead

#28

Moses Yoder

Re: cringing

Moses Yoder

I don't have any really nice japanese chisels but I have a nice set of Stanley 750's with the red handles and the labels still on the handles. The thought of someone using those for cutting steel seems to bother me for some reason :(

Re: After I'm Dead

#29

scott grandstaff

Re: cringing

scott grandstaff

Did you ever put a nice long bevel on a lipped shipwrights adze, and then hone it bright?

Its kind of a pain.

So, one day years ago, I came home from a town run and there are my inlaws standing in the driveway.

She has a large potted fern at her feet, (one of our common as weeds type ferns), and beaming with delight.

He is beaming with manly pride.

Guess what is laying on the ground alongside the rock cluttered hole the fern just came out of?

"Man that thing worked slick."

UGGGGGGGGGGGGGGGGGGGGGGGGGGGGGHHHH

yours Scott

Re: After I'm Dead

#30

Re: cringing

Bob Hackett

Here`s a quick question for you;

What kind of a man stands before an oiled mahogany rack and selects a highly polished, hand made metalworking hammer that rests upon polished bronze rails from among a collection of other polished hammers with exotic wood handles after spotting it resting next to other hand made and polished tools and a clean and waxed Snap-on toolbox and then loans it to a diver so that diver can use it to beat a rusted steel pin into a submerged marine rail and then drop said hammer into the mud only to be found at low tide several days later and says nothing to the owner of the hammer?

The question doesn`t really have a clearly defined answer.I was just wondering once again after all this time.

Thanks for raking open old wounds there pals.

Re: After I'm Dead

#31

Moses Yoder

Re: well Bob

Moses Yoder

If you look at the thread about the difference between Gandpas and Grandmas over on the main message board, Grandpas seem to have an adequate vocabulary for such a man if you add all the words together.

Re: After I'm Dead

#32

PS

Bob Hackett

After careful thought I would venture to guess that the "hammer bandit" as I have come to call him would have fallen out of the same family tree as the nimrod who used one of my finely honed laminated framing chisels to sever an electrical line which happened to still be hot.

At least the nimrod had the courtesy to bring the chisel back and hand it to me.

I didn`t have the patience to run thru the whole grinding/honing regimen but he DID spend far longer than he wanted to on the grinding aspect.

Think hard ,friends,about how you display or store your tools if they are not completely hidden or securely locked up.

The clueless co-workers always pick the prettiest or most expensive ones to try out their destructive skills on.How they ferret them out is beyond me.

Re: After I'm Dead

#33

Re: well Bob

Bob Hackett

Some of the boys I worked with could make my Grandma turn the air blue,that`s for sure!

Grandmas know the words(they`ve heard them often enough from around the corner) they usually just choose not to put voice to them.

After raising 4 boys my mother has quite a vocabulary,in more than 2 languages to boot.

There was never any question as to if she was mad or not,just who or what she was mad at.Neither I nor my brothers spoke German,Irish or Yiddish.We had problems enough understanding her English once she got rolling at an accelerated clip.

My father,on the other hand,spoke only the language of the Permanently PO`d.

A simple language but VERY effective.

Re: After I'm Dead

#34

Re: cringing

David Weaver

Should've made the bevel steeper. Maybe that would've deterred them!

Would've held up better in dirt and rocks, too!

:b

Re: After I'm Dead

#35

Re: After I'm Dead

David Weaver

I think the most disturbing part of that story, aside from the fact that they bashed up a good chisel, is that you're left with a chisel that was probably horribly beat up, you can't put it on a grinder, and you'd have to lap it or tap out the hollow even if you worked past the problem spot. It would take hours and leave you feeling arthritic.

Supposing the chisel was in a condition where it could be brought back to shape (and was brought back to shape), it sure makes for a good story, though, when it's shorter than the rest by an appreciable amount.

Re: After I'm Dead

#36

It is my fervent hope...

Bob Hackett

That you sent a pic of the chisel and a bill for a replacement to the company this guy was employed with.

If it had to be custom made at great expense,so much the better.

I was told a long time ago that there are at least 3 people who need to be considered when dealing with any wrong that has been done.There`s the 2 people directly involved and then the third person to be considered is the person who will next feel the effects of the person`s actions if you let it slide.

Chances are it will be repeated it if nobody calls the offender on it or holds them responsible for their actions.

If you are intent on being a bull then you ought to at least be forced to bring your own china shop.

Re: After I'm Dead

#37

Gotta love it...

Scott Burr in Ben Lomond CA

The clueless co-workers always pick the prettiest or most expensive ones to try out their destructive skills on.How they ferret them out is beyond me.

Or the clueless brother, cousin or nephew, etc. :(

How do they ferret them out? I'll never know...

Re: After I'm Dead

#38

Re: feeling arthritic.

ThomD

Well thank goodness I was in my 20s at the time. There was a big chip out of the tool, and it took a very long time to grind (from my knees) out on the King green stone, which is coarse but kinda dull in my experience. I had a set of 15 or 18 of these chisels, and to tell the truth I have hardly used them. Sorta like when my moving boxes with various planes got left in a puddle, and my Lee Valley plane from before they were making planes, just had this one off, garanteed in the 10s or something, got all rusty. It wrecks it for me, all you can think of is the vilation, which is a little precious.

To make maters worse they left a slick of oil crud all over the floor, that my mother, father, and I all laboured mightily to remove.

There is a lot to be said for setting these kinds of things straight. However, I do feel it is a bit like describing sunsets to blind people (probably highly worthy when you put it that way). I think a lot of us have somethng we are pationate about, maybe these jokers are crazy about hokey. But getting through to them on something else is likely a wast of time.

Re: After I'm Dead

#39

Regardless...

Bob Hackett

Having someone come into your home to do a job and then just pick up your things and abuse them is not something to either be taken lightly or allowed to continue.

If you found the person who did the job had walked upstairs and whizzed in the kitchen sink and left it you`d be rather upset wouldn`t you?Would you allow that worker to just go on to the next home and repeat the offense?

The clueless remain clueless until they are confronted with a reason to wise up.This need not be a nose to nose,aggressive confrontation but it needs to be clearly communicated that this is NOT how reasonable people conduct business and will not be tolerated from this point on.

Re: After I'm Dead

#40

Hear Hear!  My sentiments exactly

Marv

Re: After I'm Dead

#41

Re: PS

Bill Houghton, Sebastopol, CA

"...the nimrod who used one of my finely honed laminated framing chisels to sever an electrical line which happened to still be hot."

Although you may have wished at the time that he was holding firmly to the metal part of the chisel while standing barefoot in a puddle of water on a concrete floor, it's probably best that he wasn't.