New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

New Toothing Plane

Posts

New Toothing Plane

#1

Stephen Shepherd

New Toothing Plane

Stephen Shepherd

I just finished up another toothing plane [the second one I have made] which is for an order I received while teaching workshops on Hide Glue at the Piano Technicians Guild convention in Las Vegas at the end of June.


Made of maple, the grain is not oriented correctly [like most planes] because of the size of wood that I had. All hand made, I drilled the mortise from both sides to prevent the 1/4" twist auger from drifting. I used chisels, a pad saw, a rasp and a float to finish up the mouth and throat.

The blade is a standard Buck Brothers replacement blade for a block plane and I filed in the serrations on the back side of the blade. After finishing the plane and the final fit up of the blade it was 1/16" out of square. I checked the wood and it was square but the blade needed a couple of minutes at the grind stone to get it square.

I used the pistol grip hand saw to rip out the wedge for the plane. The new owner will be picking up the plane today, it is a trade and he is bringing me the items we agreed to trade.

Stephen

Re: New Toothing Plane

#2

Re: New Toothing Plane

Stuart Hough

Looks great, Stephen. I'm sure the new owner will get a lot of satisfaction from it's use. How far back on the iron did you file the teeth? I'd also be interested in how they hold up through the subsequent sharpening sessions. Real nice work!

Re: New Toothing Plane

#3

Stephen Shepherd

Re: New Toothing Plane

Stephen Shepherd

Stuart,

Thank you. The serrations are about 3/4" long on the flat side of the blade. It is sharpened just like a regular plane blade, taking care not to score the stone.

Stephen

Re: New Toothing Plane

#4

Re: New Toothing Plane

bugbear

The throat is much narrower than the three "original" (English) toothing planes I have; is your design a deliberate variation?

BugBear

Re: New Toothing Plane

#5

Stephen Shepherd

Re: New Toothing Plane

Stephen Shepherd

BugBear,

My original American and English toothing planes have larger throats. I made the second one similar to the first one I made [of curly walnut] which also had a narrow throat.


I wasn't sure how the first one would work with a narrow throat, but it works just fine, so I made the second one with the same narrow throat.

Stephen