New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Unusual Breast Drill Variation *LINK*

Posts

Unusual Breast Drill Variation *LINK*

#1

Unusual Breast Drill Variation *LINK*

David Miller from Iowa

Picked this up today - pretty standard Millers Falls #94, 95 or 96 - I'll have to study it a bit to tell. But the reason I'm posting is that it has the auxiliary breast plate which I have never seen (therefore, rare to me).

Do any of you have this on your breast drills? I found it on Randy Roeder's Millers falls page under Model #96 (link provided)



2nd picture shows the top compared to just the regular breast plate.


http://oldtoolheaven.com/breast_drills/breast_drill3.htm

Re: Unusual Breast Drill Variation *LINK*

#2

Re: Unusual Breast Drill Variation 2nd pic

David Miller from Iowa


Re: Unusual Breast Drill Variation *LINK*

#3

Re: Unusual Breast Drill Variation 2nd pic

Marv

David,

I have several MF-97,s that have the large breast pad. With it removed, the smaller pad can be gripped with one hand with the middle finger through the hole in the frame below. I consider the 97 and similar models the Mother of all breast drills. It weighs 8 pounds. It has a 3 jaw 1/2" keyless chuck for gripping round shanks.

Marv


Re: Unusual Breast Drill Variation *LINK*

#4

Wow

David Miller from Iowa

Well done. nice collection. My drill drawer looks paltry by comparison

In the same lot I picked up a nice 1880s Richardson hand saw.


Re: Unusual Breast Drill Variation *LINK*

#5

'Tis all relative

Bill Houghton, Sebastopol, CA

You may find this hard to imagine, Marv and David, but there are people in the world who don't have one single eggbeater drill*.

And people, like the student who worked for me some years back, who don't know what one is.

*Mind, I'm not one of them.

Re: Unusual Breast Drill Variation *LINK*

#6

Nice drawer full of drills...

Marv

David,

I see some nice look'n Yankee North Bros. and Goodell Pratt drills in that pile. Thanks for posting and sharing.

Here,s a picture of some MF-2,s of various models.


This is my favorite MF-97 along with some other favorites. The stands are 4" concaved grinding wheels with a bolt through the hole.


Speaking of an old Richardson saw.....I recently restored one that was neglected and misused. Here,s the before and after pictures. When I removed the handle, pieces fell out onto the floor.



Re: Unusual Breast Drill Variation *LINK*

#7

Unimaginable!

Marv

Bill,

Yes, I find that hard to believe.

In this day and age, it's hard to believe that there was a time when if one wanted to drill a hole, the eggbeater and breast drill was the most popular way to do it. Then came the electric drill motor and most of the wonderfully designed old hand drills ended up in barns and boxes, left to just rust away. Restoring just a few of them just seems to be the right thing to do. Same with old saws and other old hand tools.

Marv

Re: Unusual Breast Drill Variation *LINK*

#8

That's a really nice collection, Marv

Bruce, a MN Galoot

and a great restoration job on the saw 8)

Re: Unusual Breast Drill Variation *LINK*

#9

Re: That's a really nice collection, Marv *LINK*

Marv

Thanks Bruce, :)

Below is a link to a Picasa album that shows some pictures taken during the restoration. Lots of small repairs, sawing out the cracks and gluing in new wood. Also had to give it a new upper horn. The dark brown finish on the handle was done using hair dye, then several coats of Lacquer then waxed, applied using 0000 steelwool then a good rub down with a soft cloth. The teeth are 8PPI filed rip. The toe had been broken off. I squared it up so as to remove a minimum of metal.

The saw was given to me because the guy didn't think it was worth fix'n. That just made it more of a challenge.

Marv


Restoration progress pics

Re: Unusual Breast Drill Variation *LINK*

#10

Jack Guzman from Maine

Beautiful handle

Jack Guzman from Maine

I really like that handle. I'm assuming the shape is original to the saw.Nice restoring job too.

All my eggbeaters are in as found condition mostly,except for minor cleanup and lubrication. I have all mine with various different useful bits chucked into them ready to use. Not very pretty,but very handy. Of course,looking at your drills gets me drooling. ----Jack

Re: Unusual Breast Drill Variation *LINK*

#11

Thanks Jack....

Marv

Most of the drills came to me in messy condition, some siezed up with chucks that didn't work. I got most of them on eBay and some at yard sales and flea markets. Last count was close to a hundred. Haven't bought one in over a year. It was fun collecting them until I used up all available space to display them. Got more into handsaws, restoring them and selling them on eBay and of course keeping some of them. SWMBO has her sewing stuff in the same room as my tools. She finally drew a line on the floor and said, no tools past this line. I obey because she's a good cook and washes my shorts and socks. ;)

Marv

Re: Unusual Breast Drill Variation *LINK*

#12

You mean to say

Bruce, a MN Galoot

I missed ignominy by a single eggbeater? ;)

Re: Unusual Breast Drill Variation *LINK*

#13

You've only got one?

Bill Houghton, Sebastopol, CA

We'll have to do something about that.

Re: Unusual Breast Drill Variation *LINK*

#16

Re: AOL CD's?

Marv

Scott,

Wish I had thought of that instead of using them as little frisbies. They sail real good. Everyday, at least one in the mailbox. And back then they were charging for internet time by the minute. I chatted with people on the net who were paying as much as $800 a month in a few cases. My first and last bill for one month was close to $200. That was only 16 years ago. I think most of the money went to the phone company.

Marv

Re: Unusual Breast Drill Variation *LINK*

#17

Funny coincidence

David Miller from Iowa

I have been passionately collecting tools since 1981 and had never seen the Miller's Falls auxiliary breast plate until last Saturday. I just got home from an auction preview where I saw my 2nd one in 29 years - on a MF-200 breast drill. Pretty sure at this time tomorrow it will be mine - have to catch up to Marv.

Re: Unusual Breast Drill Variation *LINK*

#18

Re: Funny coincidence

Marv

David,

If you get the No.200, you'll be ahead of me. I don't have that one. Very nice drill. I have an MF-No.100 and an MF-2100, both with the same shifting mechanism as the No.200. The only difference from my two models and the No.200 is, the No.200's crank is nickle plated. Mine are both japanned. Looks like gloss black enamel.

I'm going to be watching for a No.200 on eBay. I want that nickle plated crank. :D

Marv

Re: Unusual Breast Drill Variation *LINK*

#19

Ain't that always the way? *LINK*

Bill Houghton, Sebastopol, CA

A couple of years ago, I started watching for a Stanley 610 eggbeater (keeping this on topic, notice!). After a while, I gave up and bought one from deBay - for not too much, fortunately.

Within a few months, I found one at a garage sale for $3. Now I have two of them.

These are under-discussed drills, by the way - in my opinion, at least. It would have been nice if Stanley had used cast iron for the body, but points in their favor include a thrust bearing for the chuck spindle, good machining all around, and a great chuck. And, if you have any little kids coming through the shop to help, the fully enclosed gearing is a plus - no "waffling" of little hands or arms from getting caught in the gears.


Stanley 610s look like this