We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
While going through some hand planes I was given, I came across this block plane. It appears to be some kind of double-ended block plane. Anyone know what kind of plane it is? It doesn't appear to have any markings that I can find anywhere. Is it worth keeping? I've already got a nice block plane, so I'd only be keeping it for the bullnose features.
You guessed it. Remove the lever cap and cutting iron, turn them around, reinstall, and there y'are: a bullnose block plane. Of course, "reinstall" is a bit more complicated since there's no depth adjustment except your highly refined fingers.
Several manufacturers made these. The notes below are on the Stanley version. I'm no plane expert, but the knob on yours resembles the knobs on some small Millers-Falls planes I've owned; but it could be a Sargent, too, or a Union. Someone more knowledgeable than I am might be along in a minute.
Any numbers cast into the body? That would help to nail down the maker. From there, you could troll completed auctions at eBay to see if you've got a valuable tool on your hands, but I suspect this is unlikely.
THis is similar to a Stanely #130; if it was like a 131 it would be worth about $200, but the 130 is worth only around $25 or so. The Sargent or Union version that you have might be worth a little more; there should be a logo on the iron if you clean it up gently. The 131 had a depth adjustment that flipped over to both ends of the plane that was a really cool feature.
I found a Keen Kutter version at a flea. Best $8 I had spent until I found the crack in the side where someone beat on it when I cleaned it. Looks just like mine and Stanley built the KK version. Agree with the advise to carefully clean the iron for actual manufacturer info as that is where the only ID was on mine.
Thanks for the help. I was trying to determine if this is a plane that I would actually use or whether it would just sit on a shelf and gather dust. Maybe I'll hang on to it for a little while and see if I end up using it.
which implies (though it does not prove beyond doubt*) that they were useful tools. So holding onto it until you determine if it fits in your projects and your working style makes sense.
*Stanley 75s and their clones by other makers are also common, but not, in my judgment, useful, except as paperweights or anchors for model boats.
If you retract the iron they make decent paper weights.
I can see where some time in the future people will look at how many were around during our generation(based upon E-bay sales records of course) and think they were a valuable and commonly used plane.
Some aspiring Luddites may even attempt to put them to use and their resulting experiences will lead them to conclude we were all nuts and then promptly go back to their atomic powered pocket lasers. :^)