Blanket chest question...
Scott Burr in Ben Lomond CA
For all of you who have built blanket chests how big did you make your?
Thanks!
Knowledge You Can Build On — Est. 1998
Blanket chest question...
Scott Burr in Ben Lomond CA
For all of you who have built blanket chests how big did you make your?
Thanks!
Re: Blanket chest question...
R.J.Whelan
Scott,
I just delivered a blanket chest to a client and made it to the dimensions that were most useful for her.
She wanted to be able to sit on the chest while putting on her shoes, so I made the finished height 18". It was being placed at the end of a California King bed so the length ended up being 8" less than the width of the bed (I have the same size bed so I cut a cardboard mock-up and kept trimming the length until the proportion look good to me. As to depth: I folded a blanket (from our bed) and made the depth appropriate to the dimension of folding the blanket in quarters across it's width.
Good luck with yours .......... rj
Re: Blanket chest question...
Warren in Lancaster, PA
We usually measure blanket chests by the size of the "box", the dovetailed portion. The bracket feet or turned feet and the lid would add a few extra inches. A full size blanket chest is 48 to 52 inches long, a medium size would be 38-40 , 30 to 34 would be small. The sizes I have made most often are 1) 19 high, 22 deep X 48 long, and 17 1/2 high 19 deep and 38 long. I like the 38 inch size the best. They are quite a bit easier to move around in a one man shop and they fit in peoples car trunks. The front board of a 38 chest would be 7/8X 17 1/2 X 38. The lid would be 7/8 X 38 1/8 X 19 1/8 (extra added for clearance).
Re: Blanket chest question...
craigd
I used a Shop Smith plan, the box is 36"x16"x19" (high). The height is nice to sit on, it is big enough to hold the next change of bedding and extra stuff that gets piled on during the winter.
Re: Blanket chest question...
Bob Hackett
Haven`t made a blanket chest yet but all the benches and other things I have made that are meant to function with another piece of furniture such as a sofa table or bench at the foot of a bed has been sized from the existing piece and I would also give some thought to what accessories will be used with the proposed piece.
The advise of sizing the chest in accordance with things like the folded blankets,sheets or quilt is an excellent suggestion.
I`d rely less on industry standards and more on what will work best for the intended customer/client.If they wanted a standard sized piece they could just drive to Ikea couldn`t they?What`s the saying,form follows function?
Thanks All!
Scott Burr in Ben Lomond CA
After looking at your sizes and measuring queen sized sheets, folded not just crumpled 
I'm going for 36"wide !8" deep and 24" tall (overall). I plan on sitting on it so I don't wake up the wife. At 24" tall it will be nice height for me.
It will match the rest of the bedroom, Shaker inspired frame and panel affair.
Thanks!
I'll keep you posted if you'd like.
We`d definately like!
Bob Hackett