Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Anyone doing steampunk woodworking on WC?

Posts

Anyone doing steampunk woodworking on WC?

#1

David Barnett

Anyone doing steampunk woodworking on WC?

David Barnett

If so, what?

Any interesting links/URLs/whatever?

I've found most of the mainstream stuff, but there's always more.

Any thoughts on hand or foot powered tools and machines in a steampunk vein?

Also, anyone built any electric fans? Brass and wood? Line shaft?

The steampunk design idiom isn't actually my thing, but anything mixed media/materials involving wood interests me and if it moves, especially so.

Re: Anyone doing steampunk woodworking on WC?

#2

Re: Anyone doing steampunk woodworking on WC?

Bob Hackett

There were some pics a while back of a ceiling fan made from hand saws(for the blades) that I was impressed with.

There was also an unofficial contest WAY back to make a plane from a lamp as so many wood planes seem to find their way into being re-purposed as lighting fixtures on e-bay.

How about posting some links or pics of what you`re looking for to get folks started.

Re: Anyone doing steampunk woodworking on WC?

#3

David Barnett

Good idea, Bob... *LINK*

David Barnett

It's not just anything bizarrely retro-futuristic-Victorian-industrial-mechanical, but it should at least have that look and feel. Steampunk has its own idiomatic design vocabulary and sensibility, however, as expressed in the opening paragraph of the link below. Let me say up front, I don't do, nor do I wear, nor do I intend to own, make, or encourage such design and behavioral proclivities. I'm just an interested bystander.


Here's an example of what I'm looking for...

Re: Anyone doing steampunk woodworking on WC?

#4

David Barnett

I meant to add...

David Barnett

Your examples aren't too far off the mark, Bob. Steampunk does often resemble an imagination-driven recombinative scavenger hunt. About as DIY as you can get. Some of the workmanship is amazing. Uh oh... there I go again.

Re: Anyone doing steampunk woodworking on WC?

#5

Not much woodworking here, but some *LINK*

Bill Houghton, Sebastopol, CA

This was from last year's Handcar Regatta, a local event, only about two years old; the local university did an art show of some of the work. Since the gallery's doors are only so high and wide, some of the pieces, like the entire stage/house/structure on a trailer, couldn't be included.

Parental boast: my son's "Absolution Booth," on which I made a small contribution during the rough-in stages, is visible in center of the bottom row.

For more information, google "Handcar Regatta Santa Rosa"

The centerpiece of this event is a person-powered-railroad-vehicle race. What I find fascinating is that a lot of the entries are far more about style than function. Many of them are extremely inefficient in translating human effort to forward momentum. If my son and I ever build a handcar together (I nurture this little fantasy, if I ever run out of things to do), we'll be building to win and for looks; the two aren't necessarily mutually exclusive.


Some pics

Re: Anyone doing steampunk woodworking on WC?

#6

David Barnett

I, too, am so proud to have contributed my part...

David Barnett

...of the $0.0002 granted to this wonderful arts extravaganza, I could just burst!

Great site. Awesome graphics. Considerable wit. The speaker atop the magnificent Absolution Booth is a nice touch. Looks like what should happen to old voting booths when they die.

Re: Anyone doing steampunk woodworking on WC?

#7

Not visible in the photo is how it worked (OT)

Bill Houghton, Sebastopol, CA

The speaker(s) on top were connected to two things: a record player inside, that played various selections (classical, Satchmo, etc.); and a microphone made from an old telephone handset. When you picked up the handset and confessed your sins, they were broadcast over the speakers.

That part encountered some technical difficulties, but the concept was great. Kids loved it.

We discussed accessibility, and my son wound up putting the handset at a location (height and placement) that was wheelchair accessible from the ground. Making the booth wheelchair accessible would have required it be about twice the size it is, and it's been hard enough for him to transport. That may have been what inspired this year's project of his, which I'll talk about after its debut.

The booth is for sale, by the way - e-mail me if you're interested.

Re: Anyone doing steampunk woodworking on WC?

#8

David Barnett

"My son, my son, what have ye done?"

David Barnett

I assumed Mr. Microphone, but the music makes it even better. Some scratchy tangos typicos would be my choice. As for accessibility, one could argue it's somewhat offset by the greater difficulty of sinning from a wheelchair, compared to us 'scratch' penitents.

For sale, eh? Tempting. Does it spit out a strip of four little before-n-after photos?

Re: Anyone doing steampunk woodworking on WC?

#9

Re: "My son, my son, what have ye done?"

Bill Houghton, Sebastopol, CA

I have a wheelchair using friend who would argue with your supposition that the chair confers safety or limits sinning.

No, no photos; you'd have to add that feature. Freight from here to - Florida, isn't it? - would be a bit pricey; won't fit in a flat rate box.

Re: Anyone doing steampunk woodworking on WC?

#10

Not yet...

Scott Burr in Ben Lomond CA

This gites a young mind wandering...

Drill a bunch of holes in a old Stanley plane and hook a steam iron onto it :D

Or...

Well young Frankenstein must go down to the shop :b

Thank you David! Keep them coming!

Who would have ever thought.

Re: Anyone doing steampunk woodworking on WC?

#11

Leo Cuellar

Not really steampunk but lineshaft... *LINK*

Leo Cuellar

I do like the steampunk look, but haven't really gone there yet with any of my stuff yet. I'm including a link to my grinder, which has been lots of fun to make & use. It will continue to evolve in the future as time & resources permit.


http://cid-dea1f1038ac49190.photos.live.com/browse.aspx/THE%20GRINDER

Re: Anyone doing steampunk woodworking on WC?

#12

David Barnett

What a thoroughly inspiring omnium-gatherum...

David Barnett

...is your gyratory gallimaufry of grits... your forced march of expiatory electrons to their sacrifice to sharpness... that manly pre-OSHAn get-the-job-doneness-look-and-feel of... what? My second pitcher is dangerously low... "extremism in the cause of sharpness is no vice!"

-- Friday is Appletini Day at the Barnett pool --

Re: Anyone doing steampunk woodworking on WC?

#13

Leo Cuellar

gallimaufry... excellent word!

Leo Cuellar

had to pull out Webster's E.U.D. for that one :D

Have one for me, I had to give it up. Which is probably why I build weird stuff like that. It isn't done yet either, I haven't figured out a good way to put guards on it. Better tool rests are coming eventually as well, although I usually freehand drill bits. That setup does really git'r done though!

Re: Anyone doing steampunk woodworking on WC?

#14

David Barnett

Re: gallimaufry... excellent word!

David Barnett

I do truly love your setup, especially as it's walkaroundable. I have too many separate motors, from Baldor to Harbor Freight, with two buffs or stones on each, and still have to change them too often. How I 'd love to line 'em up on one big VS motor and make my tools and objets d'art run the gauntlet.

And have you tried the purple sewn buffs? I have the purples, raspberries and yellows. Don't know if one's better'n the other'n, I just think they're purty. I need a pastel green whenever I find one. As I do grinding, buffing, shaping and whatever else on tools through jewels (Beall buffs for wood, too), your buffing bench is my inspiration. Serously, thanks for posting this.

I freehand drills and tool bits, too. Guards? We don't need no stinkin' guards! Let me know when you add your tool rests, please.

Re: Anyone doing steampunk woodworking on WC?

#15

Leo Cuellar

Didn't know there were so many colors

Leo Cuellar

of buffing wheels. I could stand a few more. I'm doing some copper & brass polishing & buffing out carving & turning tools, and plane blades also. VS would be nice, but I'm getting it tuned for the different tasks with various sized pulleys on the shaft & heads. That's part of the reason I went with the Grizzly arbors so I could put larger pulleys on & slow it down even more. The motor is 1/3hp 1725rpm, so the big grindstones probably spin about 500rpm, so I can grind for a seriously long time before I have to quench. I like having the buffers & brushes running backwards, its a lot easier to bear down on something than pull it up into it.

I'm getting ready to build a new workbench, the old one will become the new grinder table. That will give me a lot more space, and I'll be able to mount the motor under the table top. Then I'll have room for my 2 wet grinders. One old wide vertical(w/ an exposed wormdrive) and a newer horizontal style. Only then will I be approaching a state of nirvana :D

Glad you like it! I'm still scratching my head about the tool rests though. It will probably be about a month before the swap happens, but I will be sure to let you know, David.

Leo

Re: Anyone doing steampunk woodworking on WC?

#16

David Barnett

Your salmagundi of sheaves...

David Barnett

...gives your system its charm. It would take me years to amass and cobble a similar congerie into such tuned and tweaked pulleydom. No, I'll settle for brutish function just to have at it, philistine that I am.

I'm eyeballing a ten-foot countertop under an equally long row of overhung built-in former china cabinets, imagining how I'd illuminate said working surface span whilst sucking dust-laden air from it, and further hallucinating a Gearloosishly-contrapted sliding tool rest that maintains consistent grinding/buffing aspects all-the-while smart-switching speeds throughout its ineluctable, inexorable, juggernaut-like monorailed linear traverse of this floor-cabinet-underhung-variable-speed-motor-driven-line-shafted-buffing-buffet.

Of course... that's when I wake up.

Re: Anyone doing steampunk woodworking on WC?

#18

David Barnett

Must I don the burqa to cover my mouth?

David Barnett

Re: Anyone doing steampunk woodworking on WC?

#20

Leo Cuellar

Re: Your salmagundi of sheaves...

Leo Cuellar

Sorry it took so long to get back to you, David. My 3 day work week begins Sat. AM. I really think you'd have to capture the robot from T3 in order to pull that one off, or maybe sic Charlie Belden on it.

You helped me solve my tool rest dilemma though. I should have been thinking inside the box, instead of outside. Switching to square stock for the main part of the rests will inhibit the inherent instability that I inadvertently instilled into the initial incarnation. Although, now you've got me eyeballing the myriad & manifold manifestations of industrial detritus I've collected, cataloged, collated and co-mingled to see what else I can incorporate into the conflagration. I'm thinking pinwheel or whirligig or perhaps some dark and sinister Wellesian contraption. Mayhap it would anticipate my need for sharpened instruments and teeter about on three legs while I dream my dream within a dream...

Leo

Re: Anyone doing steampunk woodworking on WC?

#21

David Barnett

Yes, but perhaps we've missed the point altogether *LINK*

David Barnett

Leo, having strayed from that rational path charted long before those so-called reformers, those guilt-ridden bleeding-heart sob-sisters hampered and hobbled progress for those of superior manners, mores and a more far-seeing, hardheaded social vision, yes, giving into their saccharine sentimental twaddle and liberal folly, usurping a perfectly laudable, frugal and plentiful source of energy, that is, to say "urchin power".

What couldn't a corp of otherwise unwanted and unneeded foundlings, waifs, wastrels, ragamuffins and tatterdemalions do to restore our ravaged economy? Can't you just see it? Rows and rows of treadmills turned by ever-trodding little feet, in fact, on a line shaft not at all unlike your own! Why, it's enough to make one weep.

Alas, at an end to advance this any further, I offer this final resource from fellow Floridian Molly Starks:


Steampunk Empire - the crossroads of the aether

Re: Anyone doing steampunk woodworking on WC?

#22

Leo Cuellar

Nothing left to say but, so long &

Leo Cuellar

thanks for all the fish.

Being of quixotic nature, I was thinkin' 'bout windmills. I'm more of the W.C. Fields school of thought where children are concerned.

Great yakkin' with ya' we'll have to do it again sometime! And I will definitely check out Molly's site. TX again, David.

Leo