Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Woodworking with added natural materials site *LINK*

Posts

Woodworking with added natural materials site *LINK*

#1

David Barnett

Woodworking with added natural materials site *LINK*

David Barnett

Check out "Aisth�sis", a Paris atelier devoted to making and restoring furniture and other objects covered in galuchat/shagreen, vellum, parchment, MOP, horn, and so on. Tr�s chic.

On a hand tools note, there is misunderstanding about shagreen used for abrading wood. The word 'shagreen' has referred to a whole range of not always related species, including the strip of abrasive back leather from the wild ass, from which comes 'chagrin'. In fact, the stingray was found to imitate real shagreen and was so much more available it ended up owning the name.

Don't expect what is now called shagreen or galuchat to sand wood, especially not the tanned and dyed variety you see used on wallets, belts, and Art Deco furniture (sanded). You can burnish with it, of course, but that's about all. Makes great tool handles, though, and the rawhide versions are very non-slip.

Certain sharks and dogfish were more used for their abrasive value (and no, rays are not just flattened sharks), and most of their skins have a strong directional grain. They were called shagreen before stingray nabbed the name.


Aisth�sis

Re: Woodworking with added natural materials site *LINK*

#2

Very cool Dave...

Scott Burr in Ben Lomond CA

That got my 'ol designer blood moving again. Thanks for the link.

Now how does one unroll a horn?

Re: Woodworking with added natural materials site *LINK*

#3

David Barnett

For med to lg ox or water buffalo horn...

David Barnett

How to flatten a horn?

Not a torch, even though you'll commonly read that's the way to go. Well, you can but it's too easy to scorch and blister the surface. Some boil them first, too. but steaming is better.

I prefer an oven and kevlar gloves. Ovens vary. Try 230� to 250�F for 20 to 30 minutes. One trick though, before popping it in is to cut off the tip (about 3" to 4" from the end) and start warming the end with a heat gun or torch with flame spreader, prying the layers with a pick or screwdriver. It stinks. If you're married, you mileage may vary. I don't mind the smell. I don't have a wife.

By the way, horn can be scraped.

You don't actually need wood to make horn into boxes or other neat stuff. Drawer pulls are fun, especially bar types, and small boxes are cool. I have two pairs of horn eyeglasses I like. But horn, metal, and wood together hold plenty of possibilities. You can't swing a dead cat without finding it in cattle country. For cheap.

There you go, Scott.

Re: Woodworking with added natural materials site *LINK*

#4

David Barnett

Oh, and a steam iron is handy, too.

David Barnett

Re: Woodworking with added natural materials site *LINK*

#5

David Barnett

And "Oh" again...

David Barnett

Obviously, it's easier to make the lengthwise slit while the horn is soft. There. I'm done until the next question.