Light as a feather *LINK*
Moses Yoder
I don't usually post in progress auctions but this one is too good to pass up. Someone must have had a milling machine fetish.
Light Speed Plane
Knowledge You Can Build On — Est. 1998
Light as a feather *LINK*
Moses Yoder
I don't usually post in progress auctions but this one is too good to pass up. Someone must have had a milling machine fetish.
Light Speed Plane
Re: Light as a feather
Bob Hackett
Well,at least it wasn`t devalued by having some unthinking individual drill a hang hole in it. 
Re: Light as a feather
wilbur
That #7 can serve double duty as a cheese grater.
Come to think of it, any #7 would be just the thing for making very thin shavings of Parmesan cheese. 
Doesn't go far enough
Bill Houghton, Sebastopol, CA
This kind of drilling was very common in the 1950s for lightening components in racing cars. In fact, if you had an MG, Triumph, etc., it was considered tres cool in some circles to have brake pedals and such that had been drilled for lightness, even if you never raced.
And No. 7s and 8s certainly do weigh more than, say, a No. 5. Although this weight helps with planing, the owner who did this may have been more aware of how his/her arms felt at the end of a planing session.
But it doesn't go far enough: the lever cap, chipbreaker, and frog have no extra holes in them, and to get the proper "race ready" look, the knob and tote should have been replaced with aluminum components, hollowed and drilled for lightness.
Re: fragile
scott grandstaff
I am just wondering how the seller was planning to ship it??
I suppose 20 dollars would about double box it.
It looks like it'd be worse than shipping fresh eggs!
yours Scott
OMGoodness
roninkokomo
Can you imagine the consternation this could cause over on the porch??
"W/ corrugated bottom" . . . ROFL !
steve mackay
OMG!
Scott Burr in Ben Lomond CA
Holy jointers Batman! That guy must like really Swiss cheese too.
Just don't drop it...
True...
Bill Houghton, Sebastopol, CA
how can you tell the bottom's corrugated?
What it's lacking is an arrow or two
Bill Houghton, Sebastopol, CA
to tell you in which direction to push the plane.
Then, of course, it would have circles and arrows. Where you'd fit the paragraph I'm not sure.
Two yellow strips along the top
Alexandre Grigoriev
Interesting Idea
David Miller from Iowa
I'm very much into "repurposing" stuff -just got back from a a profitable art show where I took a bunch of cast iron farm parts and passed them off as "art".
This could be an interesting winter project - I have a barrel full of old plane bodies (and a drill press) - perhaps I will give this a try and call it art. I think I would make the holes all different sizes - bigger as they go up the side of the plane.
Art
Bill Houghton, Sebastopol, CA
"just got back from a a profitable art show where I took a bunch of cast iron farm parts and passed them off as 'art'".
Marcel Duchamp would be so proud of you.