Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Quick Bench

Posts

Quick Bench

#1

Quick Bench

David Miller from Iowa

I have a pretty decent woodshop down in the walk out basement, but it is in the back of the house and in the summer I like to work on (non-woodworking) projects in the front garage up one level.

I keep all my mechanics tools in the garage and was always running downstairs to my woodshop whenever I needed a bench vise. Then one day it hit me - why don't I put a bench in the garage and put a vise on it? Just happened to have "some" (i.e., more than 2) old metal lathe bases and I also had my grandfathers benchtop he made in the 1950s by laminating 2 x 4s together.

Only took about an hour, not counting the time it took to chain it to the skid loader so I could move it - weighs about 375 pounds.

The base is from an 1880s Pratt & Whitney metal spinning lathe - I really like the old look. Top is 24" x 94" and is old growth 2 x 4s - the cheap stuff in the 1950s, but weighs about twice what construction grade stuff weighs now. Just bolted it on with several big carriage bolts. Grandad is long gone, but there is his fingerprint in some paint he spilled on the top years ago - I'm leaving it as is.

Now all I need is an older 6" USA-made (or English Record) bench vise (not a wood vise). Anyone have one to sell?

Thanks, David

PS - most metal lathe bed tops are 36" tall, so this bench is 39 inches tall (I mortised in the benchtop 1/2" around the lathe bed top so it wouldn't move). Just perfect for me as I am somewhat tall.


Re: Quick Bench

#2

Ingenious AND Nice!! Great combo!!

Larry Wyatt

Re: Quick Bench

#3

metal vise

Bill Houghton, Sebastopol, CA

You might pose this question over on OWWM - some of those guys have several vises (ok, everyone think of the other spelling and the pun involved....done!).

Bill, still kicking himself that he didn't ask about a mid-size Prentiss vise at an estate sale a few weeks ago (although he doesn't need it*, it might have been perfect for David).

*Huge Prentiss toolmaker's vise, probably 90 pounds or more; slightly smaller Parker; small Wilton bullet. First two are from revered uncle and are not about to leave my hands.

Re: Quick Bench

#4

Re: Quick Bench

ThomD

Cool. I have a "bench" with seneca lathe legs, except the table is a milling machine table. I use it for metal work, but it could be used for woodworking, and really puts the hold in hold down. One can use the t-blocks etc... to hold all kinds of shapes with huge force.

Re: Quick Bench

#5

Pics Thom,we need pics!!

Bob Hackett

Re: Quick Bench

#7

Re: Pics Thom,we need pics!!

ThomD

Sorry Bob, I won't be back in the shop till September. I am back at the shop with the ugly bench that I posted a few years back. I will put up a pic if I remember, when I get back in town.

What it looks like is that the table is about 3x8x48, with a big dovetail running along the bottom that would allow the table to function in the X dimension, I think. I fabbed a plate that cupped the dovetail and held on with set screws, and could be bolted through the traditional legs. This attachment works pretty well, and is not visible.

I also got a table off a german mill that will eventually be mouted to the back at 90 degrees, allowing me to build controls surfaces in 3 dimensions. The original plan was a bicyclele making jig, but I really use it just to hold stuff really solidly. For instance, I used it to hold stock for the plane floats I filed.

Re: Quick Bench

#8

Carefull . . .

steve mackay

thats so good look'n some yuppie is going to offer you a thousand smackers so they can put that in they're kitchen.

Re: Quick Bench

#9

seriously cool!!!

roninkokomo