We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
It's a solvent release glue, the solvent being water - I wouldn't expect a joint to outlast the first serious rainstorm - and I know that you guys over there in Lake County do get a little water now and again, what's left over after the clouds dump on us.
I've been using Titebond II as my standard glue for some while now. It's advertised as being weather-resistant, and seems to hold up well, and it works well as a general-purpose glue too. Plus, even though Titebond says it has a one-year shelf life, this is liability-avoidance speaking; in a conversation with a Titebond rep, I was told that, as long as it doesn't turn into an orange goo, it's still OK, and I had one bottle for at least four years before deciding to get a new one just in case.
Hide glue of any kind will become thermoplastic at 145 degrees Fahrenheit. You can add 1 to 2% alum [or formaldehyde] to the glue to make it waterproof and non reversible. It also makes it so that it will withstand high temperatures.
You do have to clean out the glue pot immediately or the glue has to be burned out. No problem with liquid hide glue, just mix alum with water then add to the liquid hide glue.