Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Progress on workshop organization

Posts

Progress on workshop organization

#1

Progress on workshop organization

wilbur

I thought I'd post an update on my workshop bootstrap process. I have the vast majority of my tools organized and up on the wall, which is a lot better than sitting on the ground in cardboard boxes, which is where they used to be. I'm surprised by how much room was taken by measuring and marking tools. That's pretty much the left third of the wall above the bench -- everything to the left of the chisel rack.

I still haven't made the sliding deadman yet. That's the board sitting on the right side of the bench. I also have pine board cutoffs sitting across the stretchers that will ultimately be a bottom shelf. Those cutoffs are less than an inch longer than they need to be for this purpose. Now that's efficient use of wood. ;)

And before the "time to make a project" chant starts up, I did make a small pencil cup out of cherry scraps that I had. It's nothing fancy -- just 5 sides of a cube, with rabbeted joints at the corners and a groove to hold the bottom piece in. It's on the small shelf just to the left of the chisel rack. Again, I couldn't believe how quickly it went together now that I have a workbench to use.


Re: Progress on workshop organization

#2

Isn't order a wonderful thing?

Bruce, a MN Galoot

Looking really good, Wilbur! Nice pencil holder, too. My pencils reside in two tin cans, so I think you've raised the bar :D

Bruce, Not quite so ordered in MN

Re: Progress on workshop organization

#3

My Goodness, Wilbur!

Hank Knight

That's coming right along. It looks great. So does your bench. Isn't it nice to have a place for your tools? Beats spending half your work time looking for them. I'm in the middle pf putting in a cyclone and my shop is in TOTAL disarray. It's driving me nuts. I can't find anything. I'm envious. :(

Hank

Re: Progress on workshop organization

#4

Dominic in Bucks County PA

Re: Progress on workshop organization

Dominic in Bucks County PA

Wilbur,

way to go buddy!!! Your shop looks very cool. As you've said, organization is a beautiful thing. It's almost like it's beckoning you to work in/with it

Re: Progress on workshop organization

#5

WOW ! . . .

steve mackay

That planking on the wall looks GREAT ! And outlets, outlets, outlets !

Re: Progress on workshop organization

#6

Lovely

Bill Houghton, Sebastopol, CA

you're welcome to stop out and reorganize my shop anytime, Wilbur.

Re: Progress on workshop organization

#7

Nice wall, Wilbur!

Stuart Hough

gives me an idea for mine! Bench looks great there, too!

Re: Progress on workshop organization

#8

Jesper, Denmark

Re: Progress on workshop organization

Jesper, Denmark

I really like the idea of the horizintal storage of the chisels - but do you have any concern over the endgrain strength?

Re: Progress on workshop organization

#9

Stephen Shepherd

Looking Good Wilbur

Stephen Shepherd

Glad to see that bottle of liquid hide glue. The bench and wall rack is nice too.

Stephen

Re: Progress on workshop organization

#10

Re: Progress on workshop organization

wilbur

Hi Jesper,

I'm not really concerned over the endgrain strength of my chisel rack. I cut the pins from a 1/4" oak rod from the borg, and it only needs to be strong enough to hold a chisel. ;)

One other detail that you can't see from the picture: the pins are all tilted up slightly, so that they are a few degrees up from being perfectly horizontal. This way when the chisel is on the pins it settles right up against the vertical piece.

Re: Progress on workshop organization

#11

Re: Progress on workshop organization

Larry Wyatt

Looks absolutely fantastic, Wilbur!!!

Re: Progress on workshop organization

#12

Re: Progress on workshop organization

Pam Niedermayer - Austin, TX

Looks good and functional; but... you can't buy any more chisels or Japanese planes, probably some other tool types either. What do you plan to do if you start carving? :)

Pam

Re: Progress on workshop organization

#13

Look'n good!

Marv

Looks great Wilbur, but do I see a small gap between the leg on the right where it meets the underside of the bench top?

Marv

PS..."jist kid'n" :D

Re: Progress on workshop organization

#14

Jim in Burlington Ont.

Did you sharpen all your tools

Jim in Burlington On

Personally I sweep the floor and sharpen the tools. Organization is not my strong suit. You get more shop time if you have to search for a few tools now and then.

Re: Progress on workshop organization

#15

Jesper, Denmark

Re: Duhhhh....I should have realized....

Jesper, Denmark

..that real galoots would make the support pins, and not just make saw cuts in a straight board.

My apologies, but it is not easy to see in the pic.

Anyway, got the good answer and will use it for a chisel rack mesself now.

Now, you did not dovetail them, right?

Re: Progress on workshop organization

#16

Chisel rack detail

wilbur

Just in case you were curious. The vertical pieces are 1x3 pine strips that I got from the borg, and after putting in the 1/4" oak dowels, they are mounted separately to the wall. The two pieces of the rack are not attached to each other, just to the wall. This picture shows how the slight upward angle of each dowel causes the chisel to nestle right up against the wall.

You can also see the hand tool purist screw that I used to attach the vertical piece to the wall. ;)


Re: Progress on workshop organization

#17

Carving tools

wilbur

If I start acquiring carving tools, I'll build a box to hold them, using my new workbench. ;)

Re: Progress on workshop organization

#18

Yeah, but I bet...

Kevin Adams

you used that liquid hide glue for the oak dowels! :)

Looks really nice, Wilbur. I wish I had used the pine boards on my wall instead of the white peg board. I'm down in the basement, too, so was trying to brighten it up with the white, but the pine makes it look so much warmer and like a hand tool sanctuary!

Btw, about 3 more weeks and I'm back at HITWGC, too...hope our weather cools off a wee bit, but can't wait to get back there. Did you enjoy your week?

Take care,

Kevin

Re: Progress on workshop organization

#19

Jesper, Denmark

Re: Chisel rack detail

Jesper, Denmark

Great Wilbur,

But you could have hidden the manual Hitachi screwdriver in the bottom left of the first pic. ;)

Re: Progress on workshop organization

#20

Incidentally

Bill Houghton, Sebastopol, CA

In the first picture, it appears that you're using a fairly small-diameter dowel for the strut on the bottom of your leg vise - is that right?

I've bent a 20d nail with my leg vise; you may find that you need something more substantial, if you are indeed using a dowel.

Re: Progress on workshop organization

#21

Re: Incidentally

wilbur

It's a 3/8" oak dowel that I got at the borg. I've had no problems whatsoever so far, and I've been really cranking down on my vise.

Put it this way: I was planning on using the dowel temporarily until I could get a nice piece of 3/8" brass rod and make a fancy cherry handle for it. That project is now very low on the priority list.

Re: Progress on workshop organization

#22

I sit corrected

Bill Houghton, Sebastopol, CA

Maybe I need to consider a dowel when I reassemble my granddad's leg vise, down the road a piece.