Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Leather Hand Saw Covers

Posts

Leather Hand Saw Covers

#1

Leather Hand Saw Covers

Larry Wyatt

My wonderful mother-in-law(an accomplished seamstress) has agreed to make me some leather covers for the blades of my high-end hand saws. I know I've seen them. Generally suede with a flip top and a couple of snaps to keep it in place.

A google search has been fruitless.

Can anyone point me in the right direction to pictures or patterns?

Thanks a bunch!

Larry Wyatt

aka Cole's Dad

Re: Leather Hand Saw Covers

#2

Re: Leather Hand Saw Covers

Derek Cohen (in Perth, Australia)

Hi Larry

I am curious to why you might want these? Personally I would find covers a nuisance.

I can understand if you travel with your saws, or plan to transport them regularly. But for storage in a shop, well I can think of better methods .. safer methods.

A saw till seems to be more appropriate for storing saws (this is how I store all mine). Edges are protected by keeping them from touching other steel. The wooden cabinet tends to inhibit rust, and this may be taken a step further with a light rub of wax.

If you live with humidity, then cancass seems to me to be better protection than leather, which may be the type that was cured with chemicals which actually promote rust. I would check your leather/suade out carefully before using it.

I think that LN sell saw covers for their saws.

Regards from Perth

Derek

Re: Leather Hand Saw Covers

#3

Re: Leather Hand Saw Covers

Wiley Horne--So. Calif.

Hi Larry,

Here is the Lie Nielsen link Derek was talking about:

http://www.lie-nielsen.com/catalog.php?grp=1217

Your mother in law would be able to make her own pattern, if shown the basic idea (from the photos) plus the saw(s) for fitting.

I believe you may be in one of our national rust zones, and if so, might benefit from 'rust proofing' paper. It turns out that there is one manufacturer of this type of paper in the US, Cromwell Phoenix in IL, and LN carries their product as well:

http://www.lie-nielsen.com/catalog.php?sku=Ferro-Pak

My best Japanese saws always come wrapped in this type paper (brand name 'FerroBrite') and it works.

Another option from Lee Valley:

http://www.leevalley.com/en/wood/page.aspx?p=58755&cat=1,43326

Wiley

Re: Leather Hand Saw Covers

#4

Be sure you have the right leather

Bob Hackett

Most leather has been tanned with acid and this will just promote corrosion of both the iron and brass components of the saws.

What you would want to use is a vegetable tanned leather.Ask around where knife makers get their material to make sheaths.

Re: Leather Hand Saw Covers

#5

Moses Yoder

Re: how to make a tool rust

Moses Yoder

Imagine my surprise when I pulled my brand new LN 101 plane out of it's leather sheath to find it covered in rust after several months of setting in a tool box without use. I read that leather sheaths will hold moisture, and most knife collectors will not store the knife in the sheath; they set them side by side in a case, only putting the knife in the sheath for traveling. I store the plane out of it's sheath now in my tool box and have no problem with rust on it. A leather cover for a saw would be nice and impressive for traveling, but I think your saws will rust less if you build a saw till with a reasonably tight door out of wood, or just oiled and stored in an open saw till.

Re: Leather Hand Saw Covers

#6

Stephen Shepherd

Re: Leather Hand Saw Covers

Stephen Shepherd

I would recommend using oil tanned latigo leather.

Stephen

Re: Leather Hand Saw Covers

#7

Re: Leather Hand Saw Covers

Larry Wyatt

Thanks so much, everyone!!

I'm not traveling with the saws. I currently have them in an open till and they're getting spots on them from the humidity. I want to keep them as pristine as I can, so I need another option.

From your comments, it seems as though I have two viable options; the leather that Stephen spoke of or a closed saw till.

Thanks again!!

Larry

Re: Leather Hand Saw Covers

#10

Dominic in Bucks County PA

Re: Yo Dom, you out there!?!

Dominic in Bucks County PA

I used a Goldenrod dehumidifier. But as stated, you need an enclosed cabinet.

Re: Leather Hand Saw Covers

#11

Wood box and dessicant

John in NM

or something similar. If its humid enough there to spot on its own, packing it in leather probably won't help. If you really want to try the leather, I'd start with straight vegetable tanned leather - basically just that light colored cowhide they use for saddlery and straps - then treat it with melted beeswax. No oil. I've seen the entire item immersed in melted wax (be careful not to deep fry it), or the wax applied with a detail iron, like they use for stretching skins on RC airplanes. Sheaths and stuff I've done this way haven't had any tendency to rust the contents, but then its so dry out here that this wouldn't be a problem anyhow. So your mileage may vary.