Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

OT - washing machine water filters

Posts

OT - washing machine water filters

#1

OT - washing machine water filters

Bill Houghton, Sebastopol, CA

My washing machine has filter screens at the water inlets, to keep grit out. Our ancient water system sheds enough rust particles that I periodically have to pull out the machine and clean them out. It's that time again.

I went looking for replacement screens, figuring it would be easier to pull the screens and replace them than spritz out the grit with a spray bottle as I've done before (you learn a lot of skills when you're young and broke, but they're not all useful life skills). The hardware store sold me screens incorporated into the hose washers, like those we've used in our irrigation system.

So, dumb question: does it matter where I catch the grit? It would be a lot easier to put these at the inlet end of the hose, where it attaches to the spigot in the wall, because, when I have to clean out the grit in future, I wouldn't have to move the machine, but could just reach over the top of it. It seems to me it works in either location; I assume the filters at the machine inlet are there because the manufacturer (Maytag, back when that meant something) didn't trust that people would put filters on their hoses.

Re: OT - washing machine water filters

#2

Re: OT - washing machine water filters

Bob Hackett

Having well water from a shallow well that pumps out mica chips as well as rust I also got tired of moving the machine and cleaning screens(as did my wife).

The answer for us was a filter that attached to the water outlet(faucet) in the wall.This filter has a clear plastic housing and a valve at the bottom so you can both see when it needs cleaning and periodically open the valve and flush the swarf out.When the time comes to give it a good cleaning you close the faucet valve,unscrew the housing and pull the screen to clean or replace it.Ours is about 6" OAL and came with 3 different mesh screens(coarse to fine,the fine is what we use) IIRC.

My wife saw it at one of the big box stores,I recognized the name as a company that was well known and had been around for awhile so spare parts wouldn`t be a problem so we bought and installed it and it solved a lot of small problems and made wash days much more simple for us.

To answer your original question;No,it doesn`t matter where you put the screen as long as one is in place that`s the key thing.

With filters you need to look for a flow arrow or follow directions.

Hope this helps.

MB