Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

No46 Clean up

Posts

No46 Clean up

#1

No46 Clean up

Dominic in Buck's County PA

Hi everyone,

While I was waiting for the primer to dry on the 606C I'm working on, I decided to tackle this sweet little No46 I got several years ago but never got around to cleaning up.

No46 BEFORE

No46 BEFORE

No46 BEFORE

IMHO these combo planes really perform a lot better once they are cleaned up and the fences can slide easy on the guide rods. Otherwise, they are too much of a PITA and you never end up using them.

It was a simple clean up. I just took everything apart and then wire brushed each piece individually. Then they all got a coat of oil, were wiped off and re-assembled. The irons are from St. James Bay co and were purchased recently. Can't remember what I paid for them, but I do know they were cheaper than trying to find antique ones, and they were in MUCH better shape.

No46 AFTER

No46 AFTER

No46 AFTER

after the No46 was re-assembled, I took it for a short test run and set it up as if I was cutting the groove for a drawer or box bottom (a task I will be doing soon). After some minor tweaking, it worked like a charm.

No46 AFTER

Thanks for viewing

See ya around

Dominic

Re: No46 Clean up

#2

Re: No46 Clean up

Wiley Horne--So. Calif.

Hi Dom and all,

Dom, that's a wonderful job, because it's so clean, but doesn't look over-bright (too shiny).

Question about the 46: I see it is skew-bladed. But I can't see a nicker on it. Is there a nicker, or is it like a skew plough?

Thanks,

Wiley

Re: No46 Clean up

#3

Dominic in Bucks County PA

Re: No46 Clean up

Dominic in Bucks County PA

Hi Wiley,

thanks!

yeah, there's a nicker. It's on the body. There is also one on the fence.

Re: No46 Clean up

#4

Hey, That looks familiar!

Scott Burr in Ben Lomond CA

'Bout time you got around to this one :D

Nice cleaning job Dom.

What did you do to the wood parts (if anything)?

Re: No46 Clean up

#5

Dominic in Bucks County PA

Re: Hey, That looks familiar!

Dominic in Bucks County PA

Hi Scott,

Yeah, it HAS been a while since I got this hasn't it? But This isn't the one I got from you. :D I stole some parts and sold the remains to a friend.

And as far as cleaning the wood, a diluted solution of Murphy's Wood Oil soap is all I used.