Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Gloat

Posts

Gloat

#1

Gloat

David Miller from Iowa

Picked these up today at a garage sale for $11. A scarce Stanley #131 double end block plane with a rare type 1 casting, a great Goodell Pratt 2 speed eggbeater, and a Stanley #65 low angle block plane (I love this model).

Re: Gloat

#2

Total Vacuum!!

Bob Hackett

You sucked all the air out of the room with that one.

I`m barely here laying on the floor telling my wife what to say for me as I try to breath again.

Incredible score there,Dave! you have to feel at least a little guilty swooping down and scooping that all up at once for so little cash. :D

Re: Gloat

#3

Re: Gloat

Dominic in Buck's County PA

Whoa! I love that 2 speed eggbeater! I NEED one of them!

And those blocks planes are nothing to over look either! Well done, well done indeed!!!

Re: Gloat

#4

Jack Guzman from Maine

65

Jack Guzman from Maine

My 65 is my favorite block plane.I have an 18 and a 65 on a shelf over the bench and have never yet seen the need to try either LN or Lie Nielsens block planes. Nice score all in one place. Boy do you suck. ;) ---Jack

Re: Gloat

#5

Oh, man, and I'd always felt so good about my 65

Bill Houghton, Sebastopol, CA

for which I paid $12, but without the other two tools.

I concur with Jack G: great tools. A couple of years ago, I ponied up and got a Lee Valley iron (more than twice what I paid for the plane!), which kicks it up another notch in quality.

Re: Gloat

#6

Re: Gloat

R.J.Whelan

David,

Congratulations on the booty - especially the #65.

At one time I had eleven of them - I bought every one I found (at a reasonable price - >10.00). I restored them and gave them away to beginning handplane users (back in the Badger Pond days).

I have two left. I also have two L-N's. As much as I admire L-N and respect their tools I still use the #65 almost every time.

One caution: the casting around the mouth/throat is the weak spot on these planes; be careful not to apply too much clamping pressure on the knuckle cap.

Enjoy the #65 - IMHO possibly the best plane Stanley ever built. The interesting thing is block planes are pretty simple tools, but I've never been able to get another block plane to equal the performance of the #65 (the L-N is very, very close though).

RJ

Re: Gloat

#7

Side Note

R.J.Whelan

One last comment: the #65 is the only metal plane (to my knowledge) that James Krenov owned/used.

Re: Gloat

#8

Re: Gloat

wilbur

That's some major vacuum formation there. Thanks to you, Iowa's in for a bad tornado season. ;)

Re: Gloat

#9

Moses Yoder

Re: wasn't taht a #60

Moses Yoder

Now I will have to look it up in my book but I am thinking Krenov talks about the #60 or 60-1/2 in his book.

Re: Gloat

#10

Re: wasn't taht a #60

R.J.Whelan

Moses,

Maybe I'm wrong on the #65.

I went to a weekend seminar College of the Redwoods and I'm pretty sure the one metal plane I saw was a #65 - it's been at least 10-12 years so my memory could definitely be faulty on this ......... rj