Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Old Stanley Plane

Posts

Old Stanley Plane

#1

Old Stanley Plane

Rick Snyder

Hello,

I was at the Urbana, Ohio Flea Market this weekend and found a plane(3) I'd never seen before. I checked it out on the web after I got home. It was a Stanley #113, the vender wanted $125 each rust and all! Is their any practical use for them today?

Thanks, Rick

Re: Old Stanley Plane

#2

Re: Old Stanley Plane

Neal in San Jose

I have an Ohio Tool version (0113), and while it looks a little over-complicated, actually works quite well. I made an eliptical table top and this plane worked very well at smoothing the edge. Since it has a longer sole, it worked better than a spoke shave - I know, I tried both. Just set a curve, plane until it doesn't cut well, then adjust the curve. Since then, I've actually set the sole flat and used it as a smoother, just because! Fun planes, but that price sounds out of line for a rust bucket. They are also kinda fragile, and if I had to do it again, I'd probably look for a Stanley #20, which will do the same job but is supposed to be more rugged.

Re: Old Stanley Plane

#3

scott grandstaff

Re: Old Stanley Plane

scott grandstaff

I'm a big fan of the Stanley #20. I love mine (SW) and use it every chance I get.

I also have a type 2, #20, but don't use it........much. heh

The 113 is cooler looking, and has that neat tote sticking out.

But notoriously frail. $125 rusty is too much.

yours Scott

Re: Old Stanley Plane

#4

I'll throw in my .02

Scott Burr in Ben Lomond CA

I agree with all that was said. 'Cepting I haven't found the 113 frail.

These planes are a lot of fun when one has a use. Just so you know the 113 can plane a tighter curve than the 20. Sill, I think everyone needs one of each :D

$125 is way to much money for a rusty 113.

Re: Old Stanley Plane

#5

Moses Yoder

Re: Advantage of a circular plane

Moses Yoder

The advantage of the circular plane over a spoke shave is that the plane will fair the curve to a consistant radius. A spoke shave will follow the cut that was made because of the much smaller sole.

Re: Old Stanley Plane

#6

Re: Old Stanley Plane

David Weaver

One that's rusty with no cracks, I'd expect $50.

$125 is the price for one that's cherry.

As someone else said, I like the #20 better. I paid exactly the price you're stating for a #20 almost unused with nearly all of the nickel, and I'd say even then that was pushing it.

I'd expect $125 on a 113 to be a tool dealer's price for one guaranteed to be good with no rust, full iron, etc, and with a guarantee that you can send it back.

Re: Old Stanley Plane

#7

scott grandstaff

everyone needs one of each

scott grandstaff

Oh you would say that.......

Now I have start looking.

SGFH! :D :D

yours Scott

Re: Old Stanley Plane

#8

Just trying to help!

Scott Burr in Ben Lomond CA

In my usual bent ways...

SGFH. Haven't seen that in a long time, maybe it's time for me to go to a meeting :D

Re: Old Stanley Plane

#9

Re: Old Stanley Plane Thanks for the info.

Rick Snyder

Thanks to all who replied to my question. When I go back next month to flea mkt. I may pick one up, but not for $125. I have purchased several planes this year, that needed work, so that part doesen't bother me.

Rick